Oil Screen (Front Brake Cooler) - Remove
拆卸步骤
开始:
- 释放液压系统压力。 请参阅拆解和组装, "系统压力 - 释放"。
注: 为便于安装，在所有软管和所有管上作出识别标记。 塞住所有软管和管。 这将有助于防止液体泄漏和防止污染物进入系统。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
 |
高温机油或高温部件可能会导致人身伤害。 在工作温度下，机油温度高，压力高。 热油能造成烫伤。 只能在发动机停机且加注口盖充分冷却到可以徒手触及时再卸下加注口盖。 不让高温油或部件与皮肤接触。 |
Show/hide table
| 注意 |
|---|
当从机器上拆下软管组件和部件时，避免污染动力传动系。 动力传动系被异物污染将缩短部件的使用寿命。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将液压油箱中的油排入合适的容器以便保存或废弃这些油。
- 断开软管组件 (1) ，然后将软管组件 (1) 放到一旁。 断开软管组件 (2) ，然后将软管组件 (2) 放到一旁。
Show/hide table
 | |
| 图 1 | g01305715 |
- 断开管组件 (3) 和管组件 (4) 。
Show/hide table
 | |
| 图 2 | g01305716 |
- 拆下螺栓 (5) ，以便拆下油滤网 (6) 。
Show/hide table
 | |
| 图 3 | g01305733 |
Caterpillar Information System:
AS3251C Asphalt Paver Screed Plate (Extender) - Remove and Install
AS3251C Asphalt Paver Screed Plate (Main) - Remove and Install
2006/10/02 A Discharge Chute for Debris in the Ejector Body Is Used {6203}
2006/10/16 Scrapers for the Tracks on the Floor for the Ejector Body Can Be Made {6203}
The Response of the Implements Are Slow Due to the Hydraulic Pump{5070} The Response of the Implements Are Slow Due to the Hydraulic Pump{5070}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1704 - FMI 06
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1674 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1674 - FMI 05
914G2 and IT14G2 Compact Wheel Loaders Lubricant Viscosities - Fluids Recommendations
C175-16 and C175-20 Engines for Off-Highway Trucks Vibration Damper
AS3251C Asphalt Paver Height Adjuster Jack (Extender) - Remove and Install
777G Off-Highway Truck Engine Supplement Disconnect Switch (Battery) - Remove and Install
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Install
2006/09/25 An Update to the Spider Assembly Improves the Retention of the Stake Nut in the Differential Assembly {3258}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2113 - FMI 04
AS3301C Asphalt Screed Deflector Plates (Strike-Off) - Remove and Install
2006/10/02 An Improved Damper for the Suspension Seat Is Used {7312, 7324}
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Disassemble
793D Off-Highway Truck/Tractor Oil Screen (Front Brake Cooler) - Assemble
2006/09/11 A New Thermostat for the Jacket Water Heater {1383}
AS3301C Asphalt Screed Sloper Group - Remove
AS3301C Asphalt Screed Sloper Group - Install
AS3301C Asphalt Screed Sloper Jack - Remove