2006/06/26 Caterpillar


A New Lens for the Rear Signal Lamp Is Available {1430}

Usage:

725 AFX
Articulated Truck:
725 (S/N: AFX1331-UP; B1L1-UP)
730 (S/N: AGF1238-UP; B1M1-UP)
730 EJECTOR (S/N: B1W1-UP)
735 (S/N: AWR731-UP; B1N1-UP)
740 (S/N: AXM1607-UP; B1P1-UP)
740 EJECTOR (S/N: AZZ363-UP; B1R1-UP)

Description of Change: A new lens is available for the signal lamps at the rear of the machine. The new lens is made from a more durable material that improves the reliability of the signal lamp.

The new lens is better suited to environments that require the bulbs in the signal lamps to be illuminated for prolonged periods of time because of poor visibility.

Adaptable To:




Illustration 1g01280843

225-8758 Signal Lamp

(1) 267-2809 Lens

A new 267-2809 Lens replaces the former 146-2438 Lamp Lens for use in 225-8758 Signal Lamp .

The new 267-2809 Lens is effective 725 (S/N: B1L654-UP), 730 (S/N: B1M576-UP), 730 EJECTOR (S/N: B1W193-UP), 735 (S/N: B1N406-UP), 740 (S/N: B1P994-UP) and 740 EJECTOR (S/N: B1R215-UP).

The new 267-2809 Lens is directly adaptable to all earlier machines.

Caterpillar Information System:

R1700G Load Haul Dump Battery Isolation Control - If Equipped
R1700G Load Haul Dump Steering System Steering Cylinder Mounting
572R Series II Pipelayer Operator Controls
2006/07/24 A New Speed-Timing Sensor is Now Available {1912}
Bench Test Procedure For A MT835, MT845, MT855, MT865, MTC835, MTC845, MTC855, and MTC865 Agricultural Tractor Transmission {3030, 3073} Bench Test Procedure For A MT835, MT845, MT855, MT865, MTC835, MTC845, MTC855, and MTC865 Agricultural Tractor Transmission {3030, 3073}
416E, 422E and 428E Backhoe Loaders Hydraulic and Steering System Hydraulic Lockout Function
AS2302 Vers-A-Mat Screed Screed Chain (Crown) - Remove and Install
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Rotary Actuator - Remove and Install
Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274} Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274}
AS2302 Vers-A-Mat Screed Shoe (End Gate) - Remove and Install
AS2302 Vers-A-Mat Screed Actuator (End Gate) - Remove and Install
14M and 16M Motor Graders Machine Systems Battery
2006/06/26 New Pilot Line for the Hoist Control Valve Is Available {5136}
C4.4 Industrial Engine Engine Oil Pressure - Test
2006/06/26 The Addition of Spacer Plates Avoids Contact Between Ejector Frames and End Plates {6203, 7271}
2006/07/24 Improved Pin for the Transport Lock Is Used {6203, 7505}
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Remove
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Disassemble
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Assemble
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Install
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Work Tool - Lubricate
HF181, HF201 and HF221 Felling Heads Tilt Group (Full)
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer ECM Will Not Communicate with Other Systems or Display Modules
AS2302 Vers-A-Mat Screed Solenoid Valve (Extender Extend and Extender Slope) - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.