Removal Procedure
Show/hide table
|
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
Note: Put identification marks on all hoses, on all hose assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Show/hide table
|
 |
|
| Illustration 1 | g01280010 |
- Disconnect hose assemblies (3). Remove cable straps (2). Remove bolts (1) and bolts (4) in order to remove rotary actuator (5).
Show/hide table
|
 |
|
| Illustration 2 | g01280050 |
- Disconnect tube assemblies (6). Remove bolts (8) in order to remove plate (7) from rotary actuator (5) .
Show/hide table
|
 |
|
| Illustration 3 | g01280061 |
- Remove bolts (9) and the washers in order to remove plate (10) and remove bracket (11) .
Show/hide table
|
 |
|
| Illustration 4 | g01280066 |
- Remove bolts (12) and the washers in order to remove plate (13) and plate (14) .
Installation Procedure
Show/hide table
Table 1
| Required Tools |
| Tool |
Part Number |
Part Description |
Qty |
| A |
9S-3263 |
Thread Lock Compound |
1 |
Show/hide table
|
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
| |
|
| Illustration 5 | g01280066 |
- Position plate (14) and plate (13). Apply Tooling (A) to bolts (12) and install bolts (12) and the washers.
Show/hide table
|
| |
|
| Illustration 6 | g01280061 |
- Position bracket (11) and plate (10). Apply Tooling (A) to bolts (9) and install bolts (9) and the washers.
Show/hide table
|
| |
|
| Illustration 7 | g01280050 |
- Position plate (7). Apply Tooling (A) to bolts (8) and install bolts (8). Connect tube assemblies (6) to rotary actuator (5) .
Show/hide table
|
| |
|
| Illustration 8 | g01280010 |
- Position rotary actuator (5). Apply Tooling (A) to bolts (1) and bolts (4). Install bolts (1) and bolts (4). Install cable strap (2). Connect hose assemblies (3) .
