Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Show/hide table
|
|
|
Illustration 1 | g01280396 |
- Install spool (21) in valve body (11) .
- Install spring seat (22) and spring (23) in valve body (11) .
Show/hide table
|
|
|
Illustration 2 | g01280397 |
- Install O-ring seal (19) on spool (18) .
Show/hide table
|
|
|
Illustration 3 | g01280400 |
Show/hide table
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
|
- Install spool (18) in valve body (11) .
- Install sleeve (15), spring (16), and sleeve (17) .
Show/hide table
|
|
|
Illustration 4 | g01280402 |
- Install solenoid (12), end plate (14), and bolts (13) .
Show/hide table
|
|
|
Illustration 5 | g01280403 |
- Repeat Step 2 through Step 6 in order to install solenoid assembly (20) .
Show/hide table
|
|
|
Illustration 6 | g01280406 |
- Install O-ring seals (10) on valve body (11) .
Show/hide table
|
|
|
Illustration 7 | g01280410 |
- Install valve (9), caps (8), check balls (7), springs (6), pins (5), O-ring seals (4), and plugs (3) in valve block (1) .
Show/hide table
|
|
|
Illustration 8 | g01280411 |
- Install valve block (1) and bolts (2) .
End By:
- Install the solenoid valve. Refer to Disassembly and Assembly, "Solenoid Valve (Extender Slope) - Install".
- Install the solenoid valve. Refer to Disassembly and Assembly, "Solenoid Valve (Extender Extend) - Install".