Hydraulic Tank Breather - Replace
Show/hide table
Illusztráció 1 | g01280304 |
A hidraulika tartály szellőzője a hidraulika tartály tetején található.
- Emelje fel a vezetőfülkét. A vezetőfülke felemelésével kapcsolatban lásd: Használati és kezelési útmutató, "Vezetőfülke billentése".
- Vegye le a szellőzőt.
- Tegye be az új szűrőt, és húzza meg
20 ± 3 N·m (15 ± 2 lb ft) nyomatékkal.
Caterpillar Information System:
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Check Valve - Remove and Install
3176C Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
AS2302 Vers-A-Mat Screed Solenoid Valve (Extender Extend and Extender Slope) - Disassemble
AS2302 Vers-A-Mat Screed Solenoid Valve (Extender Extend and Extender Slope) - Assemble
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer ECM Will Not Communicate with Other Systems or Display Modules
HF181, HF201 and HF221 Felling Heads Tilt Group (Full)
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Work Tool - Lubricate
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Install
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Assemble
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Disassemble
AS2302 Vers-A-Mat Screed Drive Shaft (Crown) - Remove
2006/07/24 Improved Pin for the Transport Lock Is Used {6203, 7505}
770 and 772 Off-Highway Truck Hydraulic and Braking System Parking and Secondary Brake Release System Leakage - Check
3176C Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
R1700G Load Haul Dump Machine Systems Steering Metering Pump - Remove
R1600G Load Haul Dump Ejector Cylinder Bearing - Lubricate
R1600G Load Haul Dump Ejector Plate Bearing - Lubricate
2006/10/16 Changes to the Transmission Oil Lines Improve Reliability {3154}
C4.4 Industrial Engine Engine Oil Cooler - Inspect
AS2302 Vers-A-Mat Screed Power Adjuster Motor Group (Crown) - Remove
2006/06/26 A Check Valve Has Been Added to the Pilot Lines Group {5057, 5067}
AS2302 Vers-A-Mat Screed Power Adjuster Motor Group (Crown) - Install
2006/09/25 New Software Provides Quicker Extension of the Tool Cylinder {7620}
2006/07/10 Improved Felling Head Software Is Now Used {7490, 7600, 7620}