AS2302 Vers-A-Mat Asphalt Screed Caterpillar


Screed Heat Control

Usage:

AS2302 AYC
The screed is equipped with an electric heating system. Refer to Operation and Maintenance Manual, "Screed Heating"for information on operating the heater for the screed. The heater for the screed is used in order to preheat the screed plates. Preheating the screed plates prevents the asphalt from sticking to the screed plates.

Caterpillar Information System:

583T Pipelayer Power Train Final Drive Planetary Carrier (In Chassis) - Remove - Right and Left Side
C15 and C18 Generator Set Engines Gear Group (Front) - Install
583T Pipelayer Power Train Final Drive - Install - Right and Left Side
24M Motor Grader Power Train Torque Converter
M325D and M330D Excavators Power Train Electronic Control System MID 027 - CID 0298 - FMI 03
Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220} Clarification of Vertical Method Configuration in GPS/ATS AccuGrade TM Version 6.0 Software Operation for Motor Graders {7220}
587R Pipelayer Cooling System Coolant Extender (ELC) - Add
587R Pipelayer Hydraulic System Piston Pump (Implement)
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Piston Pump (Implement and Steering)
583T Pipelayer Power Train Final Drive - Remove - Right and Left Side
C15 and C18 Generator Set Engines Gear Group (Front) - Remove
AS2302 Vers-A-Mat Asphalt Screed Screed Extensions
CD54 Paving Compactor Fuses - Replace
C15 and C18 Generator Set Engines Housing (Front) - Remove
24M Motor Grader Machine Systems Battery
583T Pipelayer Power Train Final Drive Planetary Carrier (In Chassis) - Install - Right and Left Side
C15 and C18 Generator Set Engines Housing (Front) - Install
2006/02/13 New Hood Hinge Pins for Medium Wheel Loaders {7251}
2006/02/13 Change to Fan Shroud Increases Clearance {1353, 7272}
587R Pipelayer Towing the Machine
R1700G Load Haul Dump Machine Systems Tilt Cylinder - Remove
R1700G Load Haul Dump Power Train Axle Shaft - Remove
R1700G Load Haul Dump Power Train Trunnion Support (Oscillating Axle, Rear) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.