PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-8824 PRESSURE SENSOR GP ON CERTAIN G3606, G3608, G3612 AND G3616 ENGINES
Usage:
REBE7541-00
Show/hide table
| 20Dec2011 |
U-576
A-468
D-498
O-505
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-8824 PRESSURE SENSOR GP ON CERTAIN G3606, G3608, G3612 AND G3616 ENGINES |
|
| 1408 1439 1718 | PS52152 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52152" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2013 |
PROBLEM
Show/hide table
| The existing 242-8824 Pressure Sensor Gp can fail due to moisture entry on certain G3606, G3608, G3612 and G3616 Engines. If the existing pressure sensor fails it may generate an E498 event code or a 94-3 or a 106-3 diagnostic code and may not allow the sensor to calibrate. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| G3606 | 3XF00016-00374 4ZS00281-01569 |
| G3608 | 4WF00015-00248 BEN00208-00577, 579-711 |
| G3612 | 1YG00020-00260 BKE00192-00580 |
| G3616 | 4CG00023-00247 BLB00163-00555, 557-731 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3793308 | SENSOR GP-PRESS |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Remove any electrical isolation hardware that may have been installed for the 242-8824 Pressure Sensor Gp as an interim containment action. Replace the existing 242-8824 Pressure Sensor Gp with the new 379-3308 Pressure Sensor Gp. Calibrate the new 379-3308 Pressure Sensor Gp per Troubleshooting, RENR5910, "Air/Fuel Pressure Module - Calibrate". |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
25-36 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, C280-12, AND C280-16 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, C280-12, AND C280-16 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ARD HEAD ON CERTAIN C13 ON-HIGHWAY ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ARD HEAD ON CERTAIN C13 ON-HIGHWAY ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR SHUTOFF PROXIMITY SENSORS ON CERTAIN 3512C OIL WELL SERVICE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR SHUTOFF PROXIMITY SENSORS ON CERTAIN 3512C OIL WELL SERVICE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE UPPER ATAAC TUBING ON CERTAIN 3516C XQ2000 POWER MODULES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE UPPER ATAAC TUBING ON CERTAIN 3516C XQ2000 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL PRESSURE INDICATORS ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL PRESSURE INDICATORS ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN ELECTRIC STARTING MOTORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN ELECTRIC STARTING MOTORS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING BASIC ENGINE RECONFIGURATION ON CERTAIN 3126E ON-HIGHWAY TRUCK ENGINES MANUFACTURED IN 2002 AND USED IN INDUSTRIAL YARD JOCKEY APPLICATIONS PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING BASIC ENGINE RECONFIGURATION ON CERTAIN 3126E ON-HIGHWAY TRUCK ENGINES MANUFACTURED IN 2002 AND USED IN INDUSTRIAL YARD JOCKEY APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AUXILIARY COOLING HOSE ON CERTAIN C18 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AUXILIARY COOLING HOSE ON CERTAIN C18 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING C175 FUEL TRANSFER PUMPS FROM DEALER INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR REMOVING C175 FUEL TRANSFER PUMPS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C9 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C9 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUXILIARY COOLING SYSTEM HOSE ON CERTAIN C18 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AUXILIARY COOLING SYSTEM HOSE ON CERTAIN C18 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 349E EXCAVATORS, D8T TRACK-TYPE TRACTORS, 735B, 740B ARTICULATED TRUCKS, 980K WHEEL LOADERS, C15, AND C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 349E EXCAVATORS, D8T TRACK-TYPE TRACTORS, 735B, 740B ARTICULATED TRUCKS, 980K WHEEL LOADERS, C15, AND C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST VALVES, GUIDES, AND SEALS ON CERTAIN C13 AND C15 ON-HIGHWAY ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST VALVES, GUIDES, AND SEALS ON CERTAIN C13 AND C15 ON-HIGHWAY ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN ADAPTER AND TENSIONER ASSEMBLY ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN ADAPTER AND TENSIONER ASSEMBLY ON CERTAIN C9.3 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C12 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C12 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CLUSTER GEAR STUB SHAFT FLANGE BOLTS AND CLUSTER GEAR RETAINING PLATE BOLTS ON CERTAIN C175 GENERATOR SETS AND 793F , 793F XQ, 795F AC, 797F, 797F XQ OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CLUSTER GEAR STUB SHAFT FLANGE BOLTS AND CLUSTER GEAR RETAINING PLATE BOLTS ON CERTAIN C175 GENERATOR SETS AND 793F , 793F XQ, 795F AC, 797F, 797F XQ OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 223-5252 FUEL PRIMING PUMP GROUPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 223-5252 FUEL PRIMING PUMP GROUPS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES, WIRING HARNESS, FUEL FILTER, ECM, ADDING AN EXHAUST TEMPERATURE SENSOR, AND UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES, WIRING HARNESS, FUEL FILTER, ECM, ADDING AN EXHAUST TEMPERATURE SENSOR, AND UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR UPDATING ENGINE CONTROL SOFTWARE ON CERTAIN C13 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING ENGINE CONTROL SOFTWARE ON CERTAIN C13 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS ON THE EXHAUST MANIFOLD Y CONNECTION ON CERTAIN C175 ELECTRIC POWER GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS ON THE EXHAUST MANIFOLD Y CONNECTION ON CERTAIN C175 ELECTRIC POWER GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE ON CERTAIN C9 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE ON CERTAIN C9 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN C27 AND C32 ELECTRIC POWER GENERATION UNITS OPERATING IN PRIME OR CONTINUOUS ENVIRONMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN C27 AND C32 ELECTRIC POWER GENERATION UNITS OPERATING IN PRIME OR CONTINUOUS ENVIRONMENTS