PRODUCT IMPROVEMENT PROGRAM FOR RELABELING THE ENGINE EMISSIONS LABEL ON CERTAIN 3054C REMAN ENGINES
Usage:
REBE7163-00
Show/hide table
| 15Jun2011 |
U-245
A-201
D-223
O-218
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR RELABELING THE ENGINE EMISSIONS LABEL ON CERTAIN 3054C REMAN ENGINES |
|
| 7750 | PI70391 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2011 |
PROBLEM
Show/hide table
| Certain 3054C Reman Engines were labeled with the serial number prefix "54E". This is incorrect. The industrial engines cannot be supported with warranty. The following reman engine arrangement part numbers are: 10R8789, 10R8790 The following serial numbers of reman engines must be relabeled: 54E09106,54E09107,54E09109,54E09149 The new engine serial number prefix will be "EDS". |
ACTION REQUIRED
Show/hide table
| 1. Check for a 10R8789 or a 10R8790 Reman Engine in dealer parts stock. 2. Check the emissions label to see if it is one of the serial numbers listed above. Refer to Image1. 3. If the engine is one of the listed serial numbers, please e-mail the Reman Technical Help Line at Reman_Help@cat.com to request a new label. 4. Please provide the following information: a. Serial number of the engine b. Dealer name & dealer code c. Mailing address d. Recipient of the label 5. If you are reporting an engine already installed in a machine, also include the Delivery Date, Engine Application, Principle Work Code, and the Owner Class. NOTE: A Priority Service Letter will be published to cover expenses for relabeling engines already delivered. 6. When the replacement emissions label arrives, insure to properly clean the existing label. Affix the new label directly over the existing label. Refer to Image2 for an example of the new label. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all engines relabeled in dealer parts stock. 0.5 hours will be allowed for each engine that requires relabeling. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN SPEEDOMETER AND TACHOMETER MODULE GP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN SPEEDOMETER AND TACHOMETER MODULE GP FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CUSTOMER CONNECTOR (40 PIN) ON 289-2491 ENGINE HARNESS ON 3512C OIL WELL SERVICING ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE CUSTOMER CONNECTOR (40 PIN) ON 289-2491 ENGINE HARNESS ON 3512C OIL WELL SERVICING ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL COOLER CORES ON CERTAIN 3516C MARINE PROPULSION ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL COOLER CORES ON CERTAIN 3516C MARINE PROPULSION ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM TO REMOVE AND INSPECT CERTAIN REMANUFACTURED CYLINDER PACKS AND CONNECTING RODS FOR 3500 HIGH DISPLACEMENT ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM TO REMOVE AND INSPECT CERTAIN REMANUFACTURED CYLINDER PACKS AND CONNECTING RODS FOR 3500 HIGH DISPLACEMENT ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 289-0585 VALVE GROUP ON CERTAIN 770, 772, 773F, 773F OEM, 775E OEM, 775F, 777F, AND 777F OEM TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 289-0585 VALVE GROUP ON CERTAIN 770, 772, 773F, 773F OEM, 775E OEM, 775F, 777F, AND 777F OEM TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING, REPLACING OR REPAIRING 10R-1495 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING, REPLACING OR REPAIRING 10R-1495 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL STANDPIPES ON CERTAIN C4.4 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL STANDPIPES ON CERTAIN C4.4 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER ON CERTAIN 345C, 345C FM HEEL, 345C HVG UHD OEM, 345C L, 345C L OEM, 345C MH FCR, 345C MH HCR, 345C OEM, 345D, 345D L, 345D LC-VG, 345D OEM, 349D, 349D L, 349D L OEM, CIPI OEM, AND W345C MH FCR EX PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER ON CERTAIN 345C, 345C FM HEEL, 345C HVG UHD OEM, 345C L, 345C L OEM, 345C MH FCR, 345C MH HCR, 345C OEM, 345D, 345D L, 345D LC-VG, 345D OEM, 349D, 349D L, 349D L OEM, CIPI OEM, AND W345C MH FCR EX
PRODUCT SUPPORT PROGRAM FOR REWORKING THE OIL SENSING HOSE ADAPTER AND POSSIBLY THE 4W-7356 O-RING ON THE 328-1699 OIL PRESSURE CONTROL VALVE ON CERTAIN C175-16 GENRATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE OIL SENSING HOSE ADAPTER AND POSSIBLY THE 4W-7356 O-RING ON THE 328-1699 OIL PRESSURE CONTROL VALVE ON CERTAIN C175-16 GENRATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR UPGRADING THE 600VAC ARTIC COLD WEATHER PACKAGING ON CERTAIN XQ230 AND XQ300 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR UPGRADING THE 600VAC ARTIC COLD WEATHER PACKAGING ON CERTAIN XQ230 AND XQ300 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512C OIL WELL SERVICE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512C OIL WELL SERVICE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW GASKETS ON CERTAIN C9 ENGINES INSTALLED IN MASS TRANSIT BUSES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW GASKETS ON CERTAIN C9 ENGINES INSTALLED IN MASS TRANSIT BUSES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-9608 UNIT INJECTOR HYDRAULIC PUMP ON CERTAIN 3126B GEN SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-9608 UNIT INJECTOR HYDRAULIC PUMP ON CERTAIN 3126B GEN SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTING BOLTS FOR THE RADIATOR BASE TO GENSET BASE ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTING BOLTS FOR THE RADIATOR BASE TO GENSET BASE ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL INJECTORS ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL INJECTORS ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR RESEALING ALL THE CYLINDER HEAD TO BLOCK JOINTS ON CERTAIN CERTAIN TH55 KRESS COAL HAULERS PRODUCT SUPPORT PROGRAM FOR RESEALING ALL THE CYLINDER HEAD TO BLOCK JOINTS ON CERTAIN CERTAIN TH55 KRESS COAL HAULERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 301-6663 SPARK PLUGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 301-6663 SPARK PLUGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT IN CHASSIS ON CERTAIN TH55 KRESS COAL HAULERS PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT IN CHASSIS ON CERTAIN TH55 KRESS COAL HAULERS
PRODUCT SUPPORT PROGRAM FOR THE OPTIONAL ENGINE BLOCK HEATER (MAY BE MISSING A SUPPLY POWER FUSE-HOLDER AND A FUSE) ON CERTAIN C15 AND C18 GENSETS PRODUCT SUPPORT PROGRAM FOR THE OPTIONAL ENGINE BLOCK HEATER (MAY BE MISSING A SUPPLY POWER FUSE-HOLDER AND A FUSE) ON CERTAIN C15 AND C18 GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 345D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 345D HYDRAULIC EXCAVATORS