Idlers (Track)
Show/hide table
 | |
| Illustration 1 | g01142684 |
(1) Apply 5P-3931 Anti-Seize Compound to the shaft of idler.
(2) Apply 5P-3931 Anti-Seize Compound to caps and to bars.
(3) Apply a light coat of lubricant to the bore and to the seal.
(4) Apply a thin film of oil to contacting surfaces of the metal seal rings prior to assembly.
(5) Apply a light coat of lubricant to the shaft and to the seal.
Caterpillar Information System:
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Propel) - Remove
PM-201 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-201 Cold Planer Propel System Track
PM-201 Cold Planer Track Tension - Check/Adjust
PM-201 Cold Planer Upper Conveyor Lift Cylinder Mount - Lubricate
3500 Engines Auxiliary Water Pump - Assemble
3500 Engines Auxiliary Water Pump - Disassemble
PM-201 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Remove
793D Off-Highway Truck/Tractor Electronic Control Module (Integrated Brake) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Refrigerant Compressor - Remove and Install
PM-201 Cold Planer Rotor Drive Belt - Inspect
PM-201 Cold Planer Propel System Hydraulic Tank
PM-201 Cold Planer Propel System Track Adjuster and Recoil
PM-201 Cold Planer Rotor Cutter Bits - Inspect/Replace
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Remove
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Install
PM-201 Cold Planer Indicators and Gauges - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
PM-201 Cold Planer Propel System Track Roller
CP76 and CS76 Vibratory Compactors Propel System Hydraulic Oil Filter
PM-201 Cold Planer Propel System Final Drive Planetary
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Travel Motor - Remove