Track Tension - Check/Adjust
检查张力
Show/hide table
图 1 | g01141359 |
在正常工作中,耐磨板 (1) 只应显示出轻微的磨损迹象。 如果履带在耐磨板上拖动而且履带磨损过大,拧紧履带。 如果履带没有接触到耐磨板,松开履带。
调整张力
松弛履带的调整
Show/hide table
润滑脂有很高的压力。 润滑脂在压力下喷出泄压阀能够穿透身体,造成伤亡。 不要通过泄压阀来观察润滑脂是否溢出。 应观察履带或履带调整油缸来查看履带是否松动。 只要转一圈,以便把卸压阀松开。 |
- 清洁张紧器缸上的接头 (2) 。
Show/hide table
图 2 | g01158713 |
Show/hide table
图 3 | g01158742 |
插图 2 中的编号 (2) |
- 将润滑脂泵入接头 (2) ,直到顶部履带刚好接触到图 1 中的耐磨板 (1) 。
绷紧履带的调整
- 松开泄压阀 (3) 。 不要超过一整圈。 让顶部履带刚好与图 1 中的耐磨板 (1) 接触。
Show/hide table
图 4 | g01158751 |
插图 2 中的编号 (2) |
Caterpillar Information System:
PM-201 Cold Planer Upper Conveyor Lift Cylinder Mount - Lubricate
3500 Engines Auxiliary Water Pump - Assemble
3500 Engines Auxiliary Water Pump - Disassemble
PM-201 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Remove
793D Off-Highway Truck/Tractor Electronic Control Module (Integrated Brake) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Refrigerant Compressor - Remove and Install
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736} Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
785D OEM Off-Highway Truck Machine Systems Electronic Control Module (Power Train) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Throttle Lock Switch Circuit - Test
R2900G Load Haul Dump Lifting and Tying Down the Machine
PM-201 Cold Planer Propel System Track
PM-201 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Propel) - Remove
PM-201 Cold Planer Propel System Idlers (Track)
PM-201 Cold Planer Rotor Drive Belt - Inspect
PM-201 Cold Planer Propel System Hydraulic Tank
PM-201 Cold Planer Propel System Track Adjuster and Recoil
PM-201 Cold Planer Rotor Cutter Bits - Inspect/Replace
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Remove
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Install
PM-201 Cold Planer Indicators and Gauges - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test