Rotor Drive Belt - Inspect
Show/hide table
图 1 | g01141376 |
检查转筒皮带有无裂纹。 检查皮带有无烧蚀点。 检查转筒皮带是否与系带分离和有无过量磨损。 检查系带有无磨损、孔洞或起泡。
在皮带护罩底部查找有无皮带渣滓。 如果皮带显示出打滑的迹象,更换皮带。
Caterpillar Information System:
PM-201 Cold Planer Propel System Idlers (Track)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Propel) - Remove
PM-201 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-201 Cold Planer Propel System Track
PM-201 Cold Planer Track Tension - Check/Adjust
PM-201 Cold Planer Upper Conveyor Lift Cylinder Mount - Lubricate
3500 Engines Auxiliary Water Pump - Assemble
3500 Engines Auxiliary Water Pump - Disassemble
PM-201 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Remove
793D Off-Highway Truck/Tractor Electronic Control Module (Integrated Brake) - Remove and Install
PM-201 Cold Planer Propel System Hydraulic Tank
PM-201 Cold Planer Propel System Track Adjuster and Recoil
PM-201 Cold Planer Rotor Cutter Bits - Inspect/Replace
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Remove
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Install
PM-201 Cold Planer Indicators and Gauges - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
PM-201 Cold Planer Propel System Track Roller
CP76 and CS76 Vibratory Compactors Propel System Hydraulic Oil Filter
PM-201 Cold Planer Propel System Final Drive Planetary
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Travel Motor - Remove
C11 and C15 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test