Track Adjuster and Recoil
Show/hide table
Illustration 1 | g01143132 |
(1) 8Y-2735 Spring
(2) Torque for valves ... 34 ± 6 N·m (25 ± 4 lb ft)
(3) After the recoil spring stops are assembled, then back off the nut until the nut is tight against the washer.
(4) Lubricate the sealing lip with a light coat of lubricant.
Assembled length ... 367.5 mm (14.47 inch)
Free length after test ... 482.6 mm (19 inch)
Caterpillar Information System:
PM-201 Cold Planer Propel System Hydraulic Tank
PM-201 Cold Planer Rotor Drive Belt - Inspect
PM-201 Cold Planer Propel System Idlers (Track)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Propel) - Remove
PM-201 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-201 Cold Planer Propel System Track
PM-201 Cold Planer Track Tension - Check/Adjust
PM-201 Cold Planer Upper Conveyor Lift Cylinder Mount - Lubricate
3500 Engines Auxiliary Water Pump - Assemble
3500 Engines Auxiliary Water Pump - Disassemble
PM-201 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Hood and Engine Enclosure - Install
PM-201 Cold Planer Rotor Cutter Bits - Inspect/Replace
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Remove
793D Off-Highway Truck/Tractor Screen (Hoist Pump) - Install
PM-201 Cold Planer Indicators and Gauges - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
PM-201 Cold Planer Propel System Track Roller
CP76 and CS76 Vibratory Compactors Propel System Hydraulic Oil Filter
PM-201 Cold Planer Propel System Final Drive Planetary
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Travel Motor - Remove
C11 and C15 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
785D OEM Off-Highway Truck Machine Systems Power Converter (Radio) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Engine Supplement Belt Tensioner - Remove and Install