Front Idler and Track Adjuster - Install
Installation Procedure
- Attach a suitable lifting device to the front idler and track adjuster (2), as shown. Install the front idler and track adjuster (2). The weight of the front idler and track adjuster (2) is approximately 612 kg (1350 lb).
Show/hide table
 | |
| Illustration 1 | g01024524 |
- Connect the track assembly. Refer to Disassembly and Assembly, "Track - Connect".
Caterpillar Information System:
RM-300 Soil Stabilizer Safety Messages
539 Knuckleboom Loader Cooling System Coolant Level - Check
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Drag Conveyor and Left Auger Conveyor) - Remove
793D Off-Highway Truck Battery Disconnect Switch
C15 and C18 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Throttle Position Sensor Circuit - Test
R2900G Load Haul Dump Collet Pin Bolt Torque - Check
PM-201 Cold Planer Servicing the Rotor
PM-201 Cold Planer Service Support (Leg Lock)
PM-201 Cold Planer Hood Tilt
PM-201 Cold Planer Machine Interlocks
PM-201 Cold Planer Engine and Machine Warm-Up
PM-201 Cold Planer Stopping the Machine
539 Knuckleboom Loader Delimber - Lubricate
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Lift Cylinder - Remove and Install
C7 and C9 Engines for Caterpillar Built Machines E096 High Fuel Pressure
3126B Engines Fuel System Pressure - Test
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
785D OEM Off-Highway Truck Engine Shutdown Switch
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Sprocket - Remove and Install
785D OEM Off-Highway Truck Vital Information Management System (VIMS)
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Blade - Remove
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Blade - Install
PM-201 Cold Planer Stopping the Engine