Gear Pump (Hydraulic Oil Cooler)
Show/hide table
 | |
| Illustration 1 | g01086953 |
Location of gear pump Rear view of machine | |
The gear pump for circulating hydraulic oil through the cooler is located on the rear of the propel pump. The gear pump is driven by a through drive on the propel charge pump.
Show/hide table
 | |
| Illustration 2 | g01086981 |
Gear pump (hydraulic oil cooler) | |
The gear pump gets oil from the hydraulic tank. The oil then flows to a manifold block that is located just in front of the cooling package. This manifold block routes the oil through the cooler, or through a bypass valve if the cooler has too much back pressure. The oil then flows through a filter and back to the hydraulic tank.
Caterpillar Information System:
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Disassemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper - Check
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Alternator - Remove and Install
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Guards - Operator Protection
Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258} Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258}
Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352} Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352}
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
797 Off-Highway Truck Safety Messages
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Air Cleaner - Remove and Install
980H Wheel Loader Power Train Differential and Bevel Gear - Assemble
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Assemble
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Electric Starting Motor - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine Enclosure - Remove and Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Remove
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Equipment Lowering with Loss of Hydraulic Power
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0817 - FMI 04
797B Off-Highway Truck Brake Accumulator (Service) - Disassemble
797B Off-Highway Truck Brake Accumulator (Service) - Assemble
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 02
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 09
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1960 - FMI 09