Engine Enclosure - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
- Attach Tooling (A) and a suitable lifting device to engine enclosure (1) .
Show/hide table
Illustration 1 | g01086944 |
- Remove gas springs (2) from both sides of the engine enclosure.
Show/hide table
Illustration 2 | g01086945 |
- Remove bolts (3) and brackets (2) .
Show/hide table
Illustration 3 | g01086949 |
- Remove pins (5) and washers (6) from both sides of the engine enclosure.
Show/hide table
Illustration 4 | g01086959 |
- Remove the engine enclosure. The weight of the engine enclosure is approximately 55 kg (121 lb).
Installation Procedure
- Attach Tooling (A) and a suitable lifting device to engine enclosure (1). The weight of engine enclosure (1) is approximately 55 kg (121 lb). Position engine enclosure (1) on the machine.
Show/hide table
Illustration 5 | g01086944 |
- Install washers (6) and pins (5) on both sides of the engine enclosure.
Show/hide table
Illustration 6 | g01086959 |
- Install brackets (4) and bolts (3) .
Show/hide table
Illustration 7 | g01086949 |
- Install gas springs (2) on both sides of the engine enclosure.
Show/hide table
Illustration 8 | g01086945 |
- Remove Tooling (A) and the suitable lifting device.
Caterpillar Information System:
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Electric Starting Motor - Remove and Install
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Assemble
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Gear Pump (Hydraulic Oil Cooler)
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Disassemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper - Check
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Alternator - Remove and Install
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Guards - Operator Protection
Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258} Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258}
Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352} Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352}
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Remove
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Equipment Lowering with Loss of Hydraulic Power
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0817 - FMI 04
797B Off-Highway Truck Brake Accumulator (Service) - Disassemble
797B Off-Highway Truck Brake Accumulator (Service) - Assemble
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 02
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 09
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1960 - FMI 09
Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
797 Off-Highway Truck Specifications
C13, C15, and C18 Tier 4 Final Engines Turbocharger
797 Off-Highway Truck Daily Inspection