Alternator - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Turn the disconnect switch to the OFF position.
- Remove bolts (2) and guard (1) from the engine.
Show/hide table
Illustration 1 | g01086807 |
- Disconnect harness assemblies (3) .
Show/hide table
Illustration 2 | g01086828 |
- Loosen bolt (7) .
Show/hide table
Illustration 3 | g01086845 |
- Remove bolt (6) from alternator (4) .
- Remove bolt (5) and alternator (4) .
Installation Procedure
- Install alternator (4) and install bolt (5) .
Show/hide table
Illustration 4 | g01086845 |
- Install bolt (6) in alternator (4) .
- Tighten bolt (7). Refer to Operation and Maintenance, "Belts - Inspect/Adjust/Replace".
- Connect harness assemblies (3) .
Show/hide table
Illustration 5 | g01086828 |
- Install guard (1) on the engine and install bolts (2) .
Show/hide table
Illustration 6 | g01086807 |
- Turn the disconnect switch to the ON position.
- Close the engine enclosure.
Caterpillar Information System:
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Guards - Operator Protection
Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258} Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258}
Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352} Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352}
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
797 Off-Highway Truck Safety Messages
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Air Cleaner - Remove and Install
980H Wheel Loader Power Train Differential and Bevel Gear - Assemble
797 Off-Highway Truck Steering System Oil Sample - Obtain
797 Off-Highway Truck Hydraulic System Oil Sample - Obtain
446D Backhoe Loader Engine Supplement Crankshaft Pulley - Remove and Install
797 Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
797 Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper - Check
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Assemble
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Disassemble
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Gear Pump (Hydraulic Oil Cooler)
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Assemble
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Electric Starting Motor - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine Enclosure - Remove and Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Remove
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Equipment Lowering with Loss of Hydraulic Power
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0817 - FMI 04