Air Cleaner - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Release latches (1) and remove cover (2) .
Show/hide table
Illustration 1 | g01086685 |
- Remove primary filter element (3) .
Show/hide table
Illustration 2 | g01086701 |
- Remove secondary filter element (4) .
Show/hide table
Illustration 3 | g01086704 |
- Disconnect tube (9) .
Show/hide table
Illustration 4 | g01086710 |
- Loosen clamps (5) and disconnect hoses (6) .
- Remove bolts (8) and air cleaner housing (7) .
Installation Procedure
- Position air cleaner housing (7) and install bolts (8) .
Show/hide table
Illustration 5 | g01086710 |
- Connect hoses (6) and tighten clamps (5) .
- Connect tube (9) .
- Install secondary filter element (4) .
Show/hide table
Illustration 6 | g01086704 |
- Install primary filter element (3) .
Show/hide table
Illustration 7 | g01086701 |
- Install cover (2) and secure latches (1) .
Show/hide table
Illustration 8 | g01086685 |
- Close the engine enclosure.
Caterpillar Information System:
980H Wheel Loader Power Train Differential and Bevel Gear - Assemble
797 Off-Highway Truck Steering System Oil Sample - Obtain
797 Off-Highway Truck Hydraulic System Oil Sample - Obtain
446D Backhoe Loader Engine Supplement Crankshaft Pulley - Remove and Install
797 Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
797 Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
2004/07/05 A New Water Spray Pump is Now Used {5614}
AP-800D and BG-230D Asphalt Pavers Machine Systems Relief Valve (Screed Counterbalance) - Test and Adjust
980H Wheel Loader Power Train Differential and Bevel Gear - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
2004/07/05 Correction to Service Magazine , "The Bearing Assembly for the Idle Pulley is Now Serviceable" {1358}
R2900G Load Haul Dump Machine Systems Steering Cylinder - Remove
797 Off-Highway Truck Safety Messages
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352} Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352}
Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258} Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258}
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Guards - Operator Protection
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Alternator - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper - Check
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Assemble
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Disassemble
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Gear Pump (Hydraulic Oil Cooler)
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Assemble