Electric Starting Motor - Remove and Install
Removal Procedure
- Open the engine enclosure.
- Turn the disconnect switch to the OFF position.
- Disconnect cable assemblies (1) from electric starting motor (3) .
Show/hide table
Illustration 1 | g01086899 |
- Remove nuts (2) and electric starting motor (3) from the engine.
Installation Procedure
- Install electric starting motor (3) on the engine. Install nuts (2) .
Show/hide table
Illustration 2 | g01086899 |
- Connect cable assemblies (1) on electric starting motor (3) .
- Turn the disconnect switch to the ON position.
- Close the engine enclosure.
Caterpillar Information System:
2004/07/26 Special Instructions Are No Longer Announced In the Service Magazine {1000, 7000}
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Assemble
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Gear Pump (Hydraulic Oil Cooler)
Caterpillar Comfort Series Seat with Three-Point Operator Restraint Comfort Seat Air Suspension with System Air - Disassemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines Comfort Seat with Front Controls - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper - Check
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Alternator - Remove and Install
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Guards - Operator Protection
Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258} Reworking Bores on 797, 797B and 797F Truck Frames, Bodies, and Axle Housings{3260, 3260, 7000, 7000, 7050, 7050, 7051, 7051, 7258, 7258}
Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352} Procedure to Update the All Wheel Drive Pressure Sensor On Tier I and Tier II Motor Graders{4352}
C11 and C13 Engines for Caterpillar Built Machines Water Pump - Test
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine Enclosure - Remove and Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Remove
THP10 Series II and THP24S Series II Access Platform for Series B Telehandlers Equipment Lowering with Loss of Hydraulic Power
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0817 - FMI 04
797B Off-Highway Truck Brake Accumulator (Service) - Disassemble
797B Off-Highway Truck Brake Accumulator (Service) - Assemble
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 02
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1639 - FMI 09
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 1960 - FMI 09
Installation of Conventional Duo-Cone Seals{7561} Installation of Conventional Duo-Cone Seals{7561}
797 Off-Highway Truck Specifications
C13, C15, and C18 Tier 4 Final Engines Turbocharger