AP-655C and BG-2255C Asphalt Pavers Machine Systems Caterpillar


Footshaft - Install

Usage:

AP-655C AYP

Installation Procedure



    Illustration 1g01055694

  1. Install nuts (5) and shafts (4).


    Illustration 2g01055693

  2. Attach a suitable lifting device to footshaft (3). Install footshaft (3) on shafts (4) and in the machine. The weight of the footshaft is approximately 32 kg (71 lb).


    Illustration 3g01055692

  3. Install plate (2) and bolts (1).

End By:

  1. Install the drag conveyor. Refer to Disassembly and Assembly, "Drag Conveyor - Remove and Install".

Caterpillar Information System:

AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Assemble
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Disassemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Remove
C13, C15, and C18 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
R1300G Load Haul Dump Power Train Oscillating Axle (Rear) to Output Transfer Gears - Connect
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems Cooling Manifold
R1300G Load Haul Dump Power Train Oscillating Axle (Rear) from Output Transfer Gears - Separate
M325D L MH and M325D MH Material Handlers Hydraulic System Travel Brake Valve
CP-323C and CS-323C Paving Compactors Engine Supplement Air Cleaner - Remove and Install
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train Bogie Wheel - Install
247B and 257B Multi Terrain Loaders Machine Systems General Information
248B and 268B Skid Steer Loaders Piston Motor (Hydrostatic) - Assemble
CB-334E and CB-335E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Disassemble - If Equipped
2004/03/15 Addition to Operation and Maintenance Manual , "Every 500 Service Hours or 3 Months" {4251}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Assemble - If Equipped
2004/03/08 Improved Gasket for the Engine Oil Cooler {1378, 7555}
2004/03/01 Improved Gasket for the Engine Oil Cooler {1378, 7555}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Install
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Hydraulic Tank
2004/06/14 A New Hoist Pump Is Now Available {5083}
AP-1055B and BG-2455C Asphalt Pavers Equipment Lowering with Engine Stopped
AP-1000B and BG-260C Asphalt Pavers Equipment Lowering with Engine Stopped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.