Oscillating Axle (Rear) from Output Transfer Gears - Separate
分离步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 2 |
| B | 138-7573 | 连杆支架 | 2 |
开始:
- 拆卸摆动轴和分动器。 请参阅拆解和组装, "摆动轴（后）和输出分动器 - 拆卸"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将工具 (A) 和工具 (B) 固定到输出分动器 (1) 上。
Show/hide table
 | |
| 图 1 | g01055632 |
- 将适当的起重机连接到工具 (A) 和工具 (B) 上。
- 将轭 (2) 从输出轴上拆下。
- 拆下螺栓 (4) 。
Show/hide table
 | |
| 图 2 | g01055633 |
- 拆下输出轴 (3) 。
- 拆卸将输出分动器固定在差速器小齿轮壳体上的 8 个螺栓 (5) 和垫圈。
Show/hide table
 | |
| 图 3 | g01055635 |
- 将输出分动器与差速器小齿轮壳体分离。 输出分动器的重量约为 550 kg (1212 lb)。
- 拆下 O 形密封圈 (6) 。
Show/hide table
 | |
| 图 4 | g01055636 |
Caterpillar Information System:
M325D L MH and M325D MH Material Handlers Hydraulic System Travel Brake Valve
CP-323C and CS-323C Paving Compactors Engine Supplement Air Cleaner - Remove and Install
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train Bogie Wheel - Install
247B and 257B Multi Terrain Loaders Machine Systems General Information
248B and 268B Skid Steer Loaders Piston Motor (Hydrostatic) - Assemble
248B and 268B Skid Steer Loaders Piston Motor (Hydrostatic) - Disassemble
AP-1000B and BG-260C Asphalt Pavers Circuit Breakers - Reset
2004/04/12 A Guard for the Air Conditioner Belt and an Alternator Belt Guard Are Available {7174}
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems Auger Conveyor
2004/03/08 A New Speed Sensor is Available {1907}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Power Train Axle - Assemble
2004/03/08 The Action Alarm for the Gauge Cluster May Not Sound {7407}
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems Cooling Manifold
R1300G Load Haul Dump Power Train Oscillating Axle (Rear) to Output Transfer Gears - Connect
C13, C15, and C18 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Remove
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Disassemble
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Install
CB-334E and CB-335E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Disassemble - If Equipped
2004/03/15 Addition to Operation and Maintenance Manual , "Every 500 Service Hours or 3 Months" {4251}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Assemble - If Equipped
2004/03/08 Improved Gasket for the Engine Oil Cooler {1378, 7555}