Footshaft - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 140-3073 | Spanner Wrench | 1 |
Start By:
- Remove the footshaft. Refer to Disassembly and Assembly, "Footshaft - Remove".
- Straighten shim (1).
Show/hide table
Illustration 2 g00776987 - Remove plug (2) from roller (3).
Show/hide table
Illustration 3 g00776988 - Straighten the tab on lockwasher (5) in order to remove locknut (4). Use Tooling (A) and remove locknut (4).
Show/hide table
Illustration 4 g00776990 - Remove lockwasher (5).
Show/hide table
Illustration 5 g00776991 - Remove washer (6).
Show/hide table
Illustration 6 g00776992 - Remove bearing cone (7) and roller (3).
Show/hide table
Illustration 7 g00776993 - Remove two bearing cups (8) from roller (3).
Show/hide table
Illustration 8 g00776994 - Remove bearing cone (9) from shaft (10).
Show/hide table
Illustration 9 g00776995 - Remove spacer (11) and shim (1) from shaft (10).
Show/hide table
Illustration 10 g01056892 - Remove nut (13), washer (12), and shaft (10).
- Repeat Steps 1 through 10 and disassemble the opposite side of the footshaft.
Show/hide table
Illustration 1 | g01056855 |
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Remove
C13, C15, and C18 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
R1300G Load Haul Dump Power Train Oscillating Axle (Rear) to Output Transfer Gears - Connect
AP-1000B and BG-260C Asphalt Pavers Conveyor Systems Cooling Manifold
R1300G Load Haul Dump Power Train Oscillating Axle (Rear) from Output Transfer Gears - Separate
M325D L MH and M325D MH Material Handlers Hydraulic System Travel Brake Valve
CP-323C and CS-323C Paving Compactors Engine Supplement Air Cleaner - Remove and Install
247B, 247B2, 257B and 257B2 Multi Terrain Loaders Power Train Bogie Wheel - Install
247B and 257B Multi Terrain Loaders Machine Systems General Information
248B and 268B Skid Steer Loaders Piston Motor (Hydrostatic) - Assemble
248B and 268B Skid Steer Loaders Piston Motor (Hydrostatic) - Disassemble
AP-1000B and BG-260C Asphalt Pavers Circuit Breakers - Reset
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Assemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Install
CB-334E and CB-335E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Disassemble - If Equipped
2004/03/15 Addition to Operation and Maintenance Manual , "Every 500 Service Hours or 3 Months" {4251}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Assemble - If Equipped
2004/03/08 Improved Gasket for the Engine Oil Cooler {1378, 7555}
2004/03/01 Improved Gasket for the Engine Oil Cooler {1378, 7555}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Install
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Hydraulic Tank
2004/06/14 A New Hoist Pump Is Now Available {5083}