A New Hoist Pump Is Now Available {5083}
- Off-Highway Truck/Tractor:
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
Description of Change: A new hoist pump for the 793C is now available. The new hoist pump has increased clearance between the journal and the bearings which improves the service life of the bearings.
Adaptable To: The new 230-7133 Gear Pump is a direct replacement for both the former 223-3755 Gear Pump and the former 171-8892 Gear Pump .
The new 230-7133 Gear Pump is effective with the following machines:
- 793C (S/N: CBR103-UP; ATY736-UP)
- 793C (S/N: 4AR1-UP; 4GZ1-UP; CBR1-102; ATY1-735)
Show/hide table
Former Parts for the 223-3755 Gear Pump Gp     | New Parts for the 230-7133 Gear Pump Gp     | Description     | Qty     |
165-4419     | 232-0246     | Drive Gear     | 1     |
165-4421     | 232-0248     | Idler Gear     | 2     |
165-4420     | 232-0247     | Drive Gear     | 1     |
Caterpillar Information System:
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Hydraulic Tank
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
2004/03/01 Improved Gasket for the Engine Oil Cooler {1378, 7555}
2004/03/08 Improved Gasket for the Engine Oil Cooler {1378, 7555}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Assemble - If Equipped
2004/03/15 Addition to Operation and Maintenance Manual , "Every 500 Service Hours or 3 Months" {4251}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Disassemble - If Equipped
CB-334E and CB-335E Vibratory Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
AP-655C and BG-2255C Asphalt Pavers Machine Systems Footshaft - Install
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Assemble
AP555E and BG555E Asphalt Pavers Machine Systems Footshaft - Disassemble
AP-1055B and BG-2455C Asphalt Pavers Equipment Lowering with Engine Stopped
AP-1000B and BG-260C Asphalt Pavers Equipment Lowering with Engine Stopped
966H and 972H Wheel Loaders Automatic Lubrication Grease Tank - Fill - Autolube - If Equipped
247B and 257B Multi Terrain Loaders Machine Systems Pilot Hydraulic System
3412E Engine for Caterpillar Built Machines CID 0190 FMI 02 Loss of Engine Speed Signal
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Fixed Axle (Front) - Remove
C13, C15, and C18 Generator Set Engines Engine Speed/Timing Sensor Circuit - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Fixed Axle (Front) - Install
3412E Engine for Caterpillar Built Machines CID 0190 FMI 03 Engine Speed open/short to + batt
3412E Engine for Caterpillar Built Machines CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
CP-323C and CS-323C Paving Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System General Information (Propel System)