Fixed Axle (Front) - Remove
拆卸步骤
开始:
- 拆卸轮胎和轮辋。 请参阅拆解和组装, "轮胎和轮辋 - 拆卸和安装"。
- 把驱动轴取下。 请参考拆解和装配, "驱动轴 - 拆卸和安装"。
Show/hide table
 |
在轮胎和轮缘上执行工作时，如不采取预防措施，可造成人员伤亡。 如果重物移动并导致轮胎和轮缘移动，可造成人员伤亡。 开始在螺柱上拧动螺母时，在轮缘和终传动之间楔入硬木块之前，不要将手臂伸入轮缘和终传动之间。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 在所有管路、软管、导线和管子上做出识别标记以便安装。 插接所有管路、软管和管子。 这将有助于防止液体泄漏和污染物进入系统。
- 将车桥中的油排入适当的容器中。
- 拆下机器每侧的螺栓 (2) 和前挡泥板 (1) 。
Show/hide table
 | |
| 图 1 | g01055913 |
- 将管组件 (3) 从前桥上断开。
Show/hide table
 | |
| 图 2 | g00494542 |
- 将适当的起吊设备固定到前桥 (5) 的每侧上。
Show/hide table
 | |
| 图 3 | g01055914 |
- 将螺栓 (4) 从前桥 (5) 上拆下。
- 利用适当的起吊设备将前桥 (5) 从机器上吊下。
- 将前桥 (5) 从机器上拆下。
Caterpillar Information System:
3412E Engine for Caterpillar Built Machines CID 0190 FMI 02 Loss of Engine Speed Signal
247B and 257B Multi Terrain Loaders Machine Systems Pilot Hydraulic System
966H and 972H Wheel Loaders Automatic Lubrication Grease Tank - Fill - Autolube - If Equipped
AP-1000B and BG-260C Asphalt Pavers Equipment Lowering with Engine Stopped
AP-1055B and BG-2455C Asphalt Pavers Equipment Lowering with Engine Stopped
2004/06/14 A New Hoist Pump Is Now Available {5083}
TH350B, TH360B, TH460B and TH560B Telehandlers Machine Systems Hydraulic Tank
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Install
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Oscillating Axle (Rear) and Trunnion Support - Remove
2004/03/01 Improved Gasket for the Engine Oil Cooler {1378, 7555}
2004/03/08 Improved Gasket for the Engine Oil Cooler {1378, 7555}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Limited Slip Differential - Assemble - If Equipped
C13, C15, and C18 Generator Set Engines Engine Speed/Timing Sensor Circuit - Test
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Fixed Axle (Front) - Install
3412E Engine for Caterpillar Built Machines CID 0190 FMI 03 Engine Speed open/short to + batt
3412E Engine for Caterpillar Built Machines CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
CP-323C and CS-323C Paving Compactors Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System General Information (Propel System)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System Operator Controls (Propel System)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System Location of Electrical Components (Propel System)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System Location of Hydraulic Components (Propel System)
CB-434D and CB-434D XW Vibratory Asphalt Compactor Propel System Propel Electrical System
CB-434D and CB-434D XW Vibratory Paving Compactor Vibratory System Hydraulic Tank
CB-434D and CB-434D XW Vibratory Asphalt Compactor Machine Systems Hydraulic Oil Filter (Charge)