Seat
Show/hide table
 | |
| Ilustrasi 1 | g01043870 |
Catatan: Lakukan penyetelan kursi pada permulaan giliran kerja. Setel kursi sewaktu operator berganti.
Ketika punggung operator bersandar pada sandaran kursi, setel kursi sehingga alat-alat kontrol dapat tetap terjangkau.
Catatan: Kunci selalu kursi pada posisinya sebelum mengoperasikan alat berat.
Untuk menyetel suspensi kursi, putar tombol. Putar tombol searah jarum jam untuk meningkatkan kekakuan suspensi kursi. Putar tombol berlawanan arah jarum jam untuk menurunkan kekakuan suspensi kursi.
Kursi Geser (Bila Terpasang)
Show/hide table
 | |
| Ilustrasi 2 | g01043871 |
Angkat pin dan geser kursi ke posisi KANAN, TENGAH, atau KIRI. Lepaskan pin untuk mengunci kursi pada posisi yang diinginkan.
Catatan: Kunci selalu kursi pada posisinya sebelum mengoperasikan alat berat.
Caterpillar Information System:
2004/03/15 A Seal Kit for the Retract Section of the Hydraulic Pump Is Now Available {5055, 5070}
2004/03/15 Changes to the Steering System {4300}
2003/12/29 A New Retaining Ring Is Now Used in the Forward Low and Reverse Clutches {3155}
2003/12/29 New Retaining Ring in Gear Clutch Is Now Used. {3155}
R1300G Load Haul Dump Power Train Trunnion Support (Oscillating Axle, Rear) - Remove
R2900G Load Haul Dump Power Train Electronic Control System Electronic Control Module (Power Train) - Replace
R2900G Load Haul Dump Power Train Electronic Control System Connector Locations
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
C13, C15, and C18 Generator Set Engines E197 High Engine Oil Temperature
446D Backhoe Loader Engine Oil and Filter - Change
CB-214E, CB-224E and CB-225E Paving Compactors Tire Shipping Pressure
446D Backhoe Loader Engine Oil Sample - Obtain
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1935 - FMI 04
735 Articulated Truck Suspension System - Check
CP-323C and CS-323C Paving Compactors Cooling System Coolant Extender (ELC) - Add
446D Backhoe Loader Hydraulic and Steering System Signal Resolver Network
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
248B and 268B Skid Steer Loaders Engine Supplement Radiator and Hydraulic Oil Cooler - Install
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Normal Operation
914G2 and IT14G2 Compact Wheel Loaders Radiator Core - Clean
M325D and M330D Excavators Power Train Electronic Control System General Information