2004/03/15 Caterpillar


Changes to the Steering System {4300}

Usage:

725 AFX
Articulated Truck:
725 (S/N: AFX1-UP)
730 (S/N: AGF1-UP)
735 (S/N: AWR1-UP)
740 (S/N: AXM1-UP)
740 EJECTOR (S/N: AZZ1-UP)

Reference: Systems Operation, Testing and Adjusting, RENR3429, "725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulics Systems". This module is part of Service Manual, RENR3480 for 725 and 730 Articulated Trucks.

Reference: Systems Operation, RENR3486, "725 and 730 Articulated Trucks Hydraulic Sub-System Schematics". This module is part of Service Manual, RENR3480 for 725 and 730 Articulated Trucks.

Reference: Systems Operation, Testing and Adjusting, RENR5126, "735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems". This module is part of Service Manual, RENR5120 for the 735 Articulated Truck and part of Service Manual, RENR5130 for the 740 Articulated Truck.

Reference: Systems Operation, RENR5127, "735 and 740 Articulated Trucks Hydraulic Sub-System Schematics" This module is part of Service Manual, RENR5120 for the 735 Articulated Truck and part of Service Manual, RENR5130 for the 740 Articulated Truck.

Reference: Systems Operation, Testing and Adjusting, RENR5174, "740 EJECTOR Articulated Truck Steering, Suspension, and Ejector Body Hydraulic Systems". This module is part of Service Manual, RENR5170 for the 740 EJECTOR Articulated Truck.

Reference: Schematic, RENR5175, "740 Ejector, Steering, Suspension and Fan Drive Systems". This module is part of Service Manual, RENR5170 for the 740 EJECTOR Articulated Truck.

Description of Change: The signal and pressure reducing valve has been removed from the steering systems on all of the listed machines.

Adaptable To: The 170-1601 Signal and Pressure Reducing Valve for the 725 and 730 Articulated trucks and the 170-1603 Signal and Pressure Reducing Valve for the 735, 740 and 740 EJECTOR Articulated Trucks have been removed from the following machines 725 (S/N: AFX867-UP), 730 (S/N: AGF804-UP), 735 (S/N: AWR461-UP), 740 (S/N: AXM880-UP) and 740 EJECTOR (S/N: AZZ295-UP). The change is not adaptable to earlier machines.

Caterpillar Information System:

2003/12/29 A New Retaining Ring Is Now Used in the Forward Low and Reverse Clutches {3155}
2003/12/29 New Retaining Ring in Gear Clutch Is Now Used. {3155}
R1300G Load Haul Dump Power Train Trunnion Support (Oscillating Axle, Rear) - Remove
R2900G Load Haul Dump Power Train Electronic Control System Electronic Control Module (Power Train) - Replace
R2900G Load Haul Dump Power Train Electronic Control System Connector Locations
CB-214D, CB-224D and CB-225D Vibratory Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
C13, C15, and C18 Generator Set Engines E197 High Engine Oil Temperature
446D Backhoe Loader Engine Oil and Filter - Change
CB-214E, CB-224E and CB-225E Paving Compactors Tire Shipping Pressure
446D Backhoe Loader Engine Oil Sample - Obtain
C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install
446D Backhoe Loader Axle Oscillation Bearings - Lubricate
2004/03/15 A Seal Kit for the Retract Section of the Hydraulic Pump Is Now Available {5055, 5070}
CB-214E, CB-224E and CB-225E Paving Compactors Seat
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1935 - FMI 04
735 Articulated Truck Suspension System - Check
CP-323C and CS-323C Paving Compactors Cooling System Coolant Extender (ELC) - Add
446D Backhoe Loader Hydraulic and Steering System Signal Resolver Network
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Control Valve
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
248B and 268B Skid Steer Loaders Engine Supplement Radiator and Hydraulic Oil Cooler - Install
420D, 430D, 432D and 442D Backhoe Loaders Auxiliary Hydraulic Electronic Control System Normal Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.