1997/01/27 Caterpillar


127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}

Usage:


3054, 3056 Engines

Reference: SENR6525, Supplement, Lucas Fuel System

Warranty: G

Features/Benefits

* Used to set engine piston at 100° before top dead center (BTDC) when timing Lucas fuel pump (at this location, the piston can be more accurately set to a specific position)
* Whistle on top of timing pin confirms that piston is on compression stroke
* Installs into nozzle bore and is held in place with nozzle clamp


127-1069 Timing Pin

Caterpillar Information System:

1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}
1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/04/07 Always Use The Maintenance Interval Schedule In The Operation And Maintenance Manual When Performing Maintenance; New Look To Maintenance Section {0374,0375,1000,7000}
1997/04/14 New "Fuel System Reuse And Salvage Guides" Reference Manual Available {1250}
1997/04/14 Subscriptions For Caterpillar's Electronic Technician (CAT ET) Software {1900,0781}
1997/04/14 Rugged, Full-Function, PC Workstation For Dealers And Customers Service Shops {7569}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.