1997/01/27 Caterpillar

9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}

Usage:

C-10, C-12, 3406E Engines

Reference: Service Manual Modules, SENR6421, 3406E Disassembly and Assembly

SENR1002, C-10 Disassembly and Assembly

SENR1007, C-12 Disassembly and Assembly

Warranty: G

Features/Benefits

* 128-7889 Puller Bridge replaces canceled 9U-7260 Puller Bridge (new puller bridge can be used on all three engines)

* Injector tool group is used to remove and install injector sleeves (all new groups will have 128-7889 Puller Bridge)

9U-6891 Injector Tool Group (1) 9U-6877 Thrust Bearing. (2) 9U-7258 Driver Cap. (3) 9U-7259 Puller Stud. (4) 4K-0367 Full Nut. (5) 5P-8247 Washer. (6) 128-7889 Puller Bridge.

Caterpillar Information System:

1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}

1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}

1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}

1997/01/27 Timing Procedure Aid {1206,1162,1166}

1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}

1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}

1997/01/20 Methods Of Obtaining Engine Flash Files {1902}

1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}

1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}

1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}

1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}

1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}

1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}

1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}

1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}

1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}

1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}

1997/03/10 Technical Information "Bargain List" {0374,0375}

1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}

1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}

1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}

1997/04/07 Always Use The Maintenance Interval Schedule In The Operation And Maintenance Manual When Performing Maintenance; New Look To Maintenance Section {0374,0375,1000,7000}

1997/04/14 New "Fuel System Reuse And Salvage Guides" Reference Manual Available {1250}

1997/04/14 Subscriptions For Caterpillar's Electronic Technician (CAT ET) Software {1900,0781}