Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
Usage:
All Machines
Reference: Special Instruction; SEHS7957; Use 4C-9900 Hydraulic Hose Service Press Arrangement.
Warranty: G
Features/Benefits
-
- * Used for sleeve and coupling removal on hose assembly of XT5 2 inch hose assembly only, due to XT5 coupling stem I.D. being different than XT3 coupling stem I.D.
- * Stem pusher is part of all new 4C-9480 Hose Tooling Group (part can be ordered separately to update former tool groups)
- * Stem pusher is heat-treated for durability
- * Used for sleeve and coupling removal on hose assembly of XT5 2 inch hose assembly only, due to XT5 coupling stem I.D. being different than XT3 coupling stem I.D.
126-1023 Stem Pusher
Caterpillar Information System:
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/09 124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09 Electronic Control Training Aid{0713}
1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/18 Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}