1997/01/27 Caterpillar

125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}

Usage:

3500B Engines

Warranty: G

Features/Benefits

* Used to remove and install 106-4584 Camshaft (simply threads onto end of camshafts and functions as a guide during installation or removal)

* Used with 8T-3169 Crank Assembly to help rotate camshaft during engine assembly and disassembly (use two 0S-1617 Bolts to attach crank assembly to camshaft)

* Length of pilot is designed to be supported by two camshaft journals at the same time (prevents camshaft from dropping as it is installed through each bearing journal)

* Groove in end of pilot provides clearance for dowel pin in camshaft (eliminates removal of dowel)

* Made from aluminum to prevent scratching or other damage to journal surfaces

Specifications/Technical Information

Diameter - 91.9 mm (3.62 in)

Length - 305 mm (12.0 in)

125-0200 Camshaft Pilot (1) 2P-1303 Taperlock Stud (Part of 125-0200). (2) 0S-1617 Bolt (two required). (3) 8T-3169 Crank Assembly.

Caterpillar Information System:

1997/01/27 Timing Procedure Aid {1206,1162,1166}

1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}

1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}

1997/01/20 Methods Of Obtaining Engine Flash Files {1902}

1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}

1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}

1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}

1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}

1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}

1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}

1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}

1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}

1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}

1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}

1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}

1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}

1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}

1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}

1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}

1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}

1997/03/10 Technical Information "Bargain List" {0374,0375}

1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}

1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}

1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}