131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
Usage:
Reference: Special Instruction, SEHS7957, "Use 4C-9900 Hydraulic Hose Service Press Arrangement".
Warranty: G
Features/Benefits
-
- * Used to remove couplings from XT hose assemblies (works on hoses from 19.0 mm (.75 in) to 50.8 mm (2.00 in)
- * Used with 4C-9900 Hose Press Group, 4C-9901 Hose Press Accessory Group, and three 8C-3996 Setscrews
- * Collet setscrews penetrate rubber and steel belts of hose, firmly gripping hose, making coupling removal faster and easier
- * Setscrews should extend approximately 6 mm (.2 in) through inside of collet
- * Collets can be ordered individually or as a group (131-3961)
- * All collets are heat treated for durability
- * Used to remove couplings from XT hose assemblies (works on hoses from 19.0 mm (.75 in) to 50.8 mm (2.00 in)
Specifications/Technical Information
- Overall width - 126.0 mm (4.96 in)
- Thickness - 31.0 mm (1.22 in)
- Threaded setscrew holes - 1/4-20
- Thickness - 31.0 mm (1.22 in)
Typical Top and Bottom Collet (1) Top Collet. (2) Bottom Collet. (3) 8C-3996 Setscrew.
Caterpillar Information System:
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}
1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}
1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/04/07 Always Use The Maintenance Interval Schedule In The Operation And Maintenance Manual When Performing Maintenance; New Look To Maintenance Section {0374,0375,1000,7000}
1997/04/14 New "Fuel System Reuse And Salvage Guides" Reference Manual Available {1250}
1997/04/14 Subscriptions For Caterpillar's Electronic Technician (CAT ET) Software {1900,0781}
1997/04/14 Rugged, Full-Function, PC Workstation For Dealers And Customers Service Shops {7569}
1997/04/28 More Frequent S*O*S Oil Analysis Improves Component Life Cycle Management{7542,7500}