128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
Usage:
3114, 3116, 3126 Engines
Reference: Special Instruction, SEHS9120, "Using the 127-3458 Sleeve Replacement Tool Group".
Warranty: G
Features/Benefits
-
- * Used to remove 119-3086 Sleeve and 101-3254 Sleeve with oversize lower bore [0.5 mm (.02 in) and 1.0 mm (.04 in) oversize]
- * Tap and puller must be added to original tool groups to remove the new injector sleeves (using original tap and puller will not work for new injector sleeves)
- * If original 122-3396 Tap fits loosely into lower bore of injector, use new 128-3102 Tap for removing injector sleeve
- * Puller is coated and heat-treated for durability and long life
- * Used to remove 119-3086 Sleeve and 101-3254 Sleeve with oversize lower bore [0.5 mm (.02 in) and 1.0 mm (.04 in) oversize]
Specifications/Technical Information
- Thread specifications - 1.040-12 thread
Caterpillar Information System:
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}
1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}
1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}
1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/04/07 Always Use The Maintenance Interval Schedule In The Operation And Maintenance Manual When Performing Maintenance; New Look To Maintenance Section {0374,0375,1000,7000}