Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
Usage:
3114, 3116, 3176, 3200, 3300, 3400, And 3406E Engines
Warranty: G
Features/Benefits
-
- * Accurately check piston ring grooves for wear to determine if piston may be returned to service.
- * Significantly reduces inspection time and improves reliability of inspection.
- * High precision tool - gauge dimensions held to .010 mm (.0004 inch).
- * If gauge passes through ring groove, piston is not reusable.
- * Foam inserts are available for protection of gauges.
- * 6V-3073 Case provides convenient storage and additional protection for gauges.
- * Decals for 6V-3073 Case are also available for each gauge.
- * Accurately check piston ring grooves for wear to determine if piston may be returned to service.
Specifications/Technical Information
3114 And 3116 Engine (Ring Grooves, All One And Two Piece Pistons)
3176 Engine (Ring Groove)
3200 Engine (Top Ring Groove)
3200 Engine (Intermediate Ring Groove)
- 4C-8167 Piston Ring Groove Gauge
- 4C-8172 Foam Insert
- NEEG2637 Decal
- 4C-8172 Foam Insert
3300 Engine (Ring Groove)
3400 Engine (Top Ring Groove, One Piece Aluminum Piston)
- 4C-8169 Gauge works with these pistons:
- 0R-2725
- 9Y-9889
- 9Y-9156
- 9Y-7212
- 9Y-4944
- 9Y-4004
- 9Y-3116
- 7E-8929
- 7E-8885
- 7E-8700
- 7E-8656
- 7E-7310
- 7E-4367
- 7E-0539
- 7E-0525
- 7E-0489
- 7E-0305
- 7E-0292
- 7C-3406
- 7W-3668
- 2W-0865
- 1W-9372
- 100-7403
- 108-2716
- 112-2876
- 113-6045
- 116-8152
- 116-8154
- 116-8155
- 117-5063
- 0R-2725
3406E Engine (Top Ring Groove, Two Piece Piston With Steel Crown)
3406E Engine (Intermediate Ring Groove)
- 4C-8171 Piston Ring Groove Gauge
- 4C-8173 Foam Insert
- NEEG2641 Decal
- 4C-8173 Foam Insert
Typical piston ring groove gauge
Caterpillar Information System:
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/09 124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09 Electronic Control Training Aid{0713}
1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}