Quickly And Accurately Set Valve Lash{1105,0766}
Usage:
3500, 3500B Engines
Reference: Special Instruction; SEHS9261; Installation Of 4C-8246 Dial Indicator To 4C-8242 Gauge.
Warranty: G
Features/Benefits
-
- * Replaces cancelled 4C-8241 Valve Lash Setting Gauge
- * Used to provide quick, accurate valve lash settings on all 3500 Engines
- * Dial indicator eliminates guesswork by measuring exact valve gap (greatly reduces time needed to accurately adjust valves)
- * Base assembly has an inner and outer sleeve: inner sleeve puts tension on rocker arm; outer sleeve puts pressure, in opposite direction, on valve bridge assembly; dial indicator measures gap to determine exact valve setting
- * Replaces cancelled 4C-8241 Valve Lash Setting Gauge
Specifications/Technical Information
- Indicator diameter - 57 mm (2.25 inch)
- Graduations - (.001 inch)
- Dial reading - 0-50-0
- Range - (.250 inch); Total - (.100 inch) per revolution
- Graduations - (.001 inch)
Assembled Valve Lash Setting Tool
(1) 125-2742 Base Assembly [for 3500]. (1) 125-2744 Base Assembly [for 3500B, not shown]. (2) 6V-2057 Contact Point [part of 125-2743]. (3) 125-2743 Collar Group. (4) 4C-8246 Indicator. (5) 9U-6272 Nylon Screw [part of 125-2743]. Not shown: 6V-2030 Indicator Extension [part of 125-2743].
Caterpillar Information System:
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/09 124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09 Electronic Control Training Aid{0713}
1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
1997/01/13 Removal And Installation Procedure For The Crankshaft Wear Sleeve{7558,0701}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/27 Timing Procedure Aid {1206,1162,1166}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27 9U-6891 Injector Tool Group To Remove And Install Injector Sleeve {1125}
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}
1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
1997/01/27 128-5113 Thread Repair Insert Used To Salvage Damaged Cylinder Block Stud Holes {1223,1117}