PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN QUAD GAUGE MODULE GROUPS FROM DEALER PARTS STOCK
Usage:
REBE7720-00
Show/hide table
| 02Nov2011 |
U-479
A-392
D-421
O-423
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN QUAD GAUGE MODULE GROUPS FROM DEALER PARTS STOCK |
|
| 7750 | PI70406 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 29Feb2012 |
PROBLEM
Show/hide table
| A manufacturing quality issue is suspected within a certain date code range of quad gauge module groups. This issue may cause one or more of the needles on the gauge to stick. |
ACTION REQUIRED
Show/hide table
| Inspect the following quad gauge module groups in dealer parts stock to confirm if they were manufactured in the affected date code range: 166-6926 166-6927 166-6928 166-6929 166-6936 166-6937 166-6938 166-6939 166-6940 166-6941 166-6942 166-6943 166-6944 166-6945 166-6946 168-6981 180-9285 200-6424 212-4960 231-8166 233-0820 The date code is a 13-digit number that can be found on the back of the part. The last six digits represent the manufacturing date. Refer to Image1 for the location of the date code. Example Date Code: 1903730092510 indicates that the part was manufactured on September 25 2010. If the quad gauge module group was not manufactured in the date code range starting at August 1 2010 and continuing through October 31 2010, return the quad gauge module group to the original packaging. Mark the package to indicate it has been inspected according to this program (PI7#####). Return the part to dealer parts stock. If the quad gauge module group was manufactured in the date code range starting at August 1 2010 and continuing through October 31 2010, remove the quad gauge module group from dealer parts stock. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSTALLING A 240 AMP ALTERNATOR ON CERTAIN C9.3 AND C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING A 240 AMP ALTERNATOR ON CERTAIN C9.3 AND C13 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 331-5291 AM/FM/WB/CD RADIO GP AND 331-5292 AM/FM RADIO GP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 331-5291 AM/FM/WB/CD RADIO GP AND 331-5292 AM/FM RADIO GP FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-1289 SUPPORT ON CERTAIN 3500 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 243-1289 SUPPORT ON CERTAIN 3500 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN PRINTED CIRCUIT BOARDS ON CERTAIN UPS 300, UPS 301, UPS 600, UPS 900, AND UPS 1200 UNINTERRUPTIBLE POWER SUPPLIES PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN PRINTED CIRCUIT BOARDS ON CERTAIN UPS 300, UPS 301, UPS 600, UPS 900, AND UPS 1200 UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON MARINE POWERTRAIN CONTROL PROCESSORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON MARINE POWERTRAIN CONTROL PROCESSORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN C27 AND C32 ELECTRIC POWER GENERATION UNITS OPERATING IN PRIME OR CONTINUOUS ENVIRONMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN C27 AND C32 ELECTRIC POWER GENERATION UNITS OPERATING IN PRIME OR CONTINUOUS ENVIRONMENTS
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE ON CERTAIN C9 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE ON CERTAIN C9 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS ON THE EXHAUST MANIFOLD Y CONNECTION ON CERTAIN C175 ELECTRIC POWER GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS ON THE EXHAUST MANIFOLD Y CONNECTION ON CERTAIN C175 ELECTRIC POWER GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING ENGINE CONTROL SOFTWARE ON CERTAIN C13 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING ENGINE CONTROL SOFTWARE ON CERTAIN C13 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES, WIRING HARNESS, FUEL FILTER, ECM, ADDING AN EXHAUST TEMPERATURE SENSOR, AND UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL LINES, WIRING HARNESS, FUEL FILTER, ECM, ADDING AN EXHAUST TEMPERATURE SENSOR, AND UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 304-3355 TORQUE CONVERTER INLET TUBE ASSEMBLY ON CERTAIN TH55-E70 FRAC TRANSMISSIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 304-3355 TORQUE CONVERTER INLET TUBE ASSEMBLY ON CERTAIN TH55-E70 FRAC TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE AIR INLET TEMPERATURE SENSOR ON CERTAIN C175 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR RELOCATING THE AIR INLET TEMPERATURE SENSOR ON CERTAIN C175 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN 3500B LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN 3500B LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COOLING SYSTEM VENT LINE ON 3516B GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE COOLING SYSTEM VENT LINE ON 3516B GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE WIRING HARNESSES ON SERVICE REPLACEMENT 3516B ENGINES IN DEALER PARTS STOCK AND DEALER EXCHANGE INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE WIRING HARNESSES ON SERVICE REPLACEMENT 3516B ENGINES IN DEALER PARTS STOCK AND DEALER EXCHANGE INVENTORY
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES LOCATED IN COUNTRIES WITH LOW REGULATED FUEL PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE ELECTRONIC CONTROL MODULE (ECM) SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES LOCATED IN COUNTRIES WITH LOW REGULATED FUEL
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE CYLINDER PACKS ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE CYLINDER PACKS ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 INDUSTRIAL ENGINES - MULTIPLE REPAIRS PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLERS AND REPLACING THE OUTLET CHECK VALVES OF THE COMMON RAIL FUEL PUMP ON CERTAIN C9.3 INDUSTRIAL ENGINES - MULTIPLE REPAIRS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING COOLANT IN CERTAIN C7S ENGINES IN SCHOOL BUSES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING COOLANT IN CERTAIN C7S ENGINES IN SCHOOL BUSES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SENSING HOSES AND ADAPTERS ON THE 326-1456 AND 352-8230 OIL PRESSURE REGULATOR GROUPS ON CERTAIN C175 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SENSING HOSES AND ADAPTERS ON THE 326-1456 AND 352-8230 OIL PRESSURE REGULATOR GROUPS ON CERTAIN C175 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN C9.3 INDUSTRIAL ENGINES