Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
Removal Procedure
- Disconnect harness assemblies (1) and remove inlet air temperature sensors (2) .
Show/hide table
Illustration 1 | g03640361 |
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install inlet air temperature sensors (2) in the reverse order.
- Tighten inlet air temperature sensors (2) to a torque of 20 ± 3 N·m (177 ± 27 lb in).
Caterpillar Information System:
374F Excavator Air Cleaner Dust Valve - Clean/Inspect
390F Excavator Engine Enclosure - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C4.4 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
390F Excavator C18 Engine Supplement Hood - Remove and Install - Clean Emissions Module
C4.4 Marine Generator Set Sea Water Pump Pressure Is Low
390F Excavator Machine Systems Control Valve (Boom Lowering)
UPS 750 Uninterruptible Power Supply System Operational Modes
G3600 A4 Engines Refill Capacities
374F Excavator Lifting and Tying Down the Machine
390F MHPU Mobile Hydraulic Power Unit Machine System Relief Valve (Main)
390F MHPU Mobile Hydraulic Power Unit Machine System Main Hydraulic Pump
2014/03/07 A New Jacket Water Elbow and Tube Assembly Are Used on Certain 3516C HD Marine Tier 3 Engines {1380}
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
390F Excavator C18 Engine Supplement Engine Rear Mount - Remove and Install
C175-16 Petroleum Generator Set Engines Control Panel
390F Excavator C18 Engine Supplement Engine - Remove and Install
390F Excavator Fan Guard - Remove and Install - Rear
XQC1600 Power Module Fuel System Primary Filter/Water Separator - Drain
G3306B Generator Sets Model View Illustrations
G3306B Generator Sets Product Description