Fan Guard - Remove and Install - Rear
拆卸步骤
开始:
- 拆卸冷却组件护罩。
Show/hide table
 |
在工作温度下，发动机冷却液温度很高，并处于受压状态。 蒸汽可能引起人身伤害。 只有在发动机已关闭且加注口盖冷却到可徒手触摸后，才能检查冷却液液位。 慢慢取下加注口盖，以释放压力。 冷却系统添加剂含碱。 避免接触皮肤和眼睛，以防止发生人身伤害。 |
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 参考操作和保养手册, "冷却系统冷却液（ELC）- 更换"以了解正确的排放和加注步骤。
- 断开软管 (1) 、 (2) 和 (3) 。
Show/hide table
 | |
| 图 1 | g03642160 |
- 拆下螺栓 (6) 和防护罩组件 (4) 。 拆下螺栓 (7) 和散热器护罩 (5) 。
Show/hide table
 | |
| 图 2 | g03642163 |
- 拆下螺栓 (8) 和散热器底部防护罩 (9) 。
Show/hide table
 | |
| 图 3 | g03642171 |
- 拆下螺栓 (11) 和防护罩组件 (10) 。 拆下螺栓 (13) 和散热器护罩 (12) 。
Show/hide table
 | |
| 图 4 | g03642181 |
安装步骤
- 按与拆卸相反的顺序安装风扇防护罩。
Caterpillar Information System:
390F Excavator C18 Engine Supplement Engine - Remove and Install
C175-16 Petroleum Generator Set Engines Control Panel
390F Excavator C18 Engine Supplement Engine Rear Mount - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
2014/03/07 A New Jacket Water Elbow and Tube Assembly Are Used on Certain 3516C HD Marine Tier 3 Engines {1380}
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install - Right Side and Left Side
374F Excavator Air Cleaner Dust Valve - Clean/Inspect
390F Excavator Engine Enclosure - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
XQC1600 Power Module Fuel System Primary Filter/Water Separator - Drain
G3306B Generator Sets Model View Illustrations
G3306B Generator Sets Product Description
G3306B Generator Sets Declaration of Conformity
G3306B Generator Sets Generator Lead Connections
390F Excavator Machine Systems Travel Parking Brake
G3306B Generator Sets Product Storage
390F Excavator Fan Guard - Remove and Install
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439} Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
C4.4 Marine Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
C4.4 Marine Generator Set Fuel System Primary Filter/Water Separator - Drain
XQC1600 Power Module Engine Crankcase Breather - Clean