G3306B Generator Sets Caterpillar


Declaration of Conformity

Usage:

XQG135 AL4

Table 1
An EC Declaration of Conformity document was provided with the product if the product was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the product. The extract shown below from an EC Declaration of Conformity for products that are declared compliant to "2006/42/EC" applies only to those products originally "CE" marked by the manufacturer listed and which have not since been modified.    
   

EC DECLARATION OF CONFORMITY OF PRODUCTS
   
   

Manufacturer:CATERPILLAR INC. 100 N.E. ADAMS STREET PEORIA, IL 61629 USA
   

Person authorized to compile the Technical File and to communicate relevant parts of the Technical File to the Authorities of European Union Member States on request:
   
    Standards & Regulations Manager,Caterpillar France S.A.S 40,
Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France    
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder    
Description:
   
Generic Denomination:     Power Generation Equipment        


   
Function:     Power Generator            


   
Model/Type:     G3306B            


   
Serial Number:                


   
Commercial Name:     Caterpillar            
Fulfills all the relevant provisions of the following Directives        

   
                       
    Directives     Notified Body    
Document No.    
   
    2006/42/EC     N/A            
    2006/95/EC     N/A    
   
   
    2004/108/EC     N/A            
    2000/14/EC amended by 2005/88/EC, Note (1)     Note (2)            
                           
Note (1)     Annex -_____ Guaranteed Sound Power Level -_____dB (A)
Representative Equipment Type Sound Power Level - _____dB (A)
Engine Power per ____-____ kW Rated engine speed - _____ rpm
Technical Documentation accessible through person listed above authorized to compile the Technical File
   
   
Note (2)     Notified body name and address        
           
Done at:
   
        Signature            
Date:
   
        Name/Position            
                           
Note: The above information was correct as of July, 2009, but may be subject to change. Refer to the individual declaration of conformity issued with the product for exact details.    

Caterpillar Information System:

G3306B Generator Sets Product Description
G3306B Generator Sets Model View Illustrations
XQC1600 Power Module Fuel System Primary Filter/Water Separator - Drain
390F Excavator Fan Guard - Remove and Install - Rear
390F Excavator C18 Engine Supplement Engine - Remove and Install
C175-16 Petroleum Generator Set Engines Control Panel
390F Excavator C18 Engine Supplement Engine Rear Mount - Remove and Install
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
C4.4 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
2014/03/07 A New Jacket Water Elbow and Tube Assembly Are Used on Certain 3516C HD Marine Tier 3 Engines {1380}
G3306B Generator Sets Generator Lead Connections
390F Excavator Machine Systems Travel Parking Brake
G3306B Generator Sets Product Storage
390F Excavator Fan Guard - Remove and Install
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439} Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
C4.4 Marine Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
C4.4 Marine Generator Set Fuel System Primary Filter/Water Separator - Drain
XQC1600 Power Module Engine Crankcase Breather - Clean
C13, C15, and C18 Tier 4 Final Engines Oil Temperature Is High
C4.4 Marine Generator Set Fuel System Secondary Filter - Replace
390F Excavator Fan - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Intake Manifold Air Temperature Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.