A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
- Caterpillar Products:
- All
Description of Change:
Show/hide table
Illustration 1 | g03434296 |
A new O-ring is now used to eliminate corrosion on the threads of the ether cylinder. The new O-ring seals between the ether cylinder/valve joint and the ambient environment. This O-ring will not allow moisture or debris to enter this area, cause corrosion, or bond the cylinder to the valve. Appropriate O-ring and installation instruction will be provided with each ether cylinder.
Adaptable To: The new O-ring is adaptable to all Caterpillar products using an Ether Cylinder As.
Caterpillar Information System:
2013/10/31 A New Pump Bracket is Now Used on Certain C12 Marine Engines Equipped with a Bronze Impeller Pump {1371}
2013/10/28 New Engine Software Is Used for Certain C280 Marine Engines {1901, 1920}
349F and 352F Excavators Machine System Specifications Fan Drive Pump
Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356} Lubrication Requirements for the 244-1224 Fan Shaft Assembly on Certain 3500 Engines{1353, 1356}
440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000} 440-0216 Major Engine Overhaul Foundational Kit for 3512B and 3512C Engines{1000}
2015/03/17 The Hydraulic Tank Relief Valve Assembly Has Been Improved on Certain Cat® Machines {4332, 4332, 5056, 5056, 5057, 5118}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit General Information
440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000} 440-1753 Major Engine Overhaul Foundational Kit for 3512B Engines{1000}
Installation of the 445-2005 Plate for the Accumulator on Certain G3500 and G3500B Engines{5077} Installation of the 445-2005 Plate for the Accumulator on Certain G3500 and G3500B Engines{5077}
PM820, PM822, and PM825 Cold Planer Cooling System Water Temperature Regulator - Replace
PM620 and PM622 Cold Planer Camera - Clean/Adjust
440-0027 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0027 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
C7.1 Industrial Engine Turbocharger Exhaust Temperature Sensor
440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000} 440-0842 Major Engine Overhaul Foundational Kit for 3512 Engines{1000}
C4.4 Engines for Caterpillar Built Machines Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
2013/10/21 Improved Case Assembly is Used on Certain CX31-P600 Petroleum Transmissions {3064}
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
C15 and C18 On-Highway Engines Exhaust Sensor Lines - Remove and Install - Exhaust Gas Venturi
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
374F Excavator Machine Systems Hydraulic System Warm-Up
440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000} 440-0928 Major Engine Overhaul Foundational Kit for 3512C Engines{1000}
C15 and C18 On-Highway Engines Nozzle Heater Harness - Remove and Install
C9 Engine Maintenance Interval Schedule
374F Excavator Counterweight Removal and Installation