Turbocharger - Remove
拆卸步骤
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
卡箍组件应只使用一次。 使用后弃置所有卡箍组件。 |
Show/hide table
注意 |
---|
波纹管组件应只使用一次。 使用后弃置所有波纹管。 |
- 将冷却系统中的冷却液排入适当的容器至液位低于涡轮增压器,以便保存或废弃。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
- 拆卸空气滤清器。
- 松开卡箍组件 (1) 和卡箍组件 (2) 。 将波纹管组件、卡箍组件 (1) 以及卡箍组件 (2) 从涡轮增压器 (3) 上拆下。 弃置波纹管组件、卡箍组件 (1) 以及卡箍组件 (2) 。
Show/hide table
图 1 | g01351417 |
- 松开卡箍组件 (7) 。 拆下螺栓 (11) 。 将波纹管组件 (10) 和卡箍组件 (7) 从涡轮增压器 (3) 上拆下。 弃置波纹管组件 (10) 和卡箍组件 (7) 。
Show/hide table
图 2 | g01351521 |
- 断开管组件 (6) 、管组件 (8) 和管 (9) 。 拆下管组件 (4) 。
- 将适当起吊设备连在涡轮增压器 (3) 上。 涡轮增压器 (3) 的重量约为 135 kg (300 lb)。
- 拆下螺栓 (5) 和涡轮增压器 (3) 。
Caterpillar Information System:
2007/04/09 An Improved Expansion Tank is Available {1379}
G3516 Petroleum Engines Accessory Drive (Front) - Remove
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Normal Operation
3500 Generator Sets Engine Rating Definitions
3508C, 3512C and 3516C Marine Engines Electric Starting Motor - Remove and Install
C15 On-Highway Engine Engine Oil Pan
C18 Marine Auxiliary Engines Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0247 - FMI 09
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Vibration Damper - Remove and Install
G3516B and G3520B Generator Set Engines Drive Housing (Front) - Remove and Install
G3516 Petroleum Engines Accessory Drive (Front) - Install
The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103} The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103}
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Remove
C18 Power Module Cooling System Coolant (ELC) - Change
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Install
G3516B and G3520B Generator Set Engines Cylinder Head - Disassemble
G3516B and G3520B Generator Set Engines Cylinder Head - Remove
G3516B and G3520B Generator Set Engines Cylinder Head - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Cylinder Head - Install
G3516B and G3520B Generator Set Engines Piston and Connecting Rods - Remove
Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803} Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803}
Procedure to Torque the Camshaft Gear{1210, 1212} Procedure to Torque the Camshaft Gear{1210, 1212}