Accessory Drive (Front) - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 5J-0490 | Bolt | 2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (3) and the washers. Remove rear cover (1) with the O-ring seals.
- Remove bolts (4) and use Tooling (A) to remove rear adapter assembly (2).
Show/hide table
Illustration 2 g01351316 Typical example - Remove bolts (6) and the washers. Remove front cover (5).
- Remove bolts (8) and use Tooling (A) to remove front adapter assembly (7).
Show/hide table
Illustration 3 g01351317 - Remove drive gear (9), thrust washers (10), and shaft (11) as a unit.
Show/hide table
Illustration 1 | g01351314 |
Typical example |
Caterpillar Information System:
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Normal Operation
3500 Generator Sets Engine Rating Definitions
3508C, 3512C and 3516C Marine Engines Electric Starting Motor - Remove and Install
C15 On-Highway Engine Engine Oil Pan
C18 Marine Auxiliary Engines Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0247 - FMI 09
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Vibration Damper - Remove and Install
G3516B and G3520B Generator Set Engines Drive Housing (Front) - Remove and Install
621H, 623H, and 627H Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0672 - FMI 08
621H, 623H, and 627H Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0672 - FMI 02
2007/04/09 An Improved Expansion Tank is Available {1379}
3508C, 3512C and 3516C Marine Engines Turbocharger - Remove
G3516 Petroleum Engines Accessory Drive (Front) - Install
The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103} The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103}
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Remove
C18 Power Module Cooling System Coolant (ELC) - Change
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Install
G3516B and G3520B Generator Set Engines Cylinder Head - Disassemble
G3516B and G3520B Generator Set Engines Cylinder Head - Remove
G3516B and G3520B Generator Set Engines Cylinder Head - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Cylinder Head - Install
G3516B and G3520B Generator Set Engines Piston and Connecting Rods - Remove