2007/04/09 Caterpillar


An Improved Expansion Tank is Available {1379}

Usage:

3196 2XR
Marine Engine:
3176B (S/N: 9WK1-UP)
3176C MARINE (S/N: 6BW1-UP)
3196 MARINE (S/N: 2XR1-UP)
C-12 MARINE (S/N: 9HP1-UP)
C12 MARINE (S/N: C1Z1-UP)

Description of Change: The new tank assembly is manufactured by using a new process for the filler neck. The new process will improve the integrity of the filler neck.

Adaptable To: The new 298-2005 Exchanger Tank is a direct replacement for the 101-1610 Exchanger Tank. The former tank assembly has been cancelled and replaced by the new tank assembly. The new tank assembly is adaptable to all earlier engines. The engines that are listed in Table 1 are manufactured with the new tank assembly.

Table 1
Manufacturing Effectivity    
S/N:9HP2791-UP    
S/N:C1Z1106-UP    
The new tank assembly is used in the following top level groups.

Caterpillar Information System:

G3516 Petroleum Engines Accessory Drive (Front) - Remove
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Normal Operation
3500 Generator Sets Engine Rating Definitions
3508C, 3512C and 3516C Marine Engines Electric Starting Motor - Remove and Install
C15 On-Highway Engine Engine Oil Pan
C18 Marine Auxiliary Engines Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0247 - FMI 09
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Vibration Damper - Remove and Install
G3516B and G3520B Generator Set Engines Drive Housing (Front) - Remove and Install
621H, 623H, and 627H Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0672 - FMI 08
3508C, 3512C and 3516C Marine Engines Turbocharger - Remove
G3516 Petroleum Engines Accessory Drive (Front) - Install
The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103} The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103}
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Remove
C18 Power Module Cooling System Coolant (ELC) - Change
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Install
G3516B and G3520B Generator Set Engines Cylinder Head - Disassemble
G3516B and G3520B Generator Set Engines Cylinder Head - Remove
G3516B and G3520B Generator Set Engines Cylinder Head - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Cylinder Head - Install
G3516B and G3520B Generator Set Engines Piston and Connecting Rods - Remove
Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803} Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.