Accessory Drive (Front) - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install shaft (11), thrust washers (10), and drive gear (9) as a unit.
Note: Ensure that the teeth of the accessory gear are correctly engaged with the teeth of the lower accessory drive gear.
Show/hide tableIllustration 2 g01351316 Typical example - Place clean engine oil on the O-ring seals for front adapter assembly (7). Install front adapter assembly (7) and install bolts (8).
- Install front cover (5), bolts (6), and the washers.
Show/hide table
Illustration 3 g01351314 - Place clean engine oil on the O-ring seals on rear adapter assembly (2) and on the bearing in rear adapter assembly (2). Install rear adapter assembly (2) and bolts (4).
- Place clean engine oil on the O-ring seal. Install rear cover (1), bolts (3), and the washers.
Show/hide table
Illustration 1 | g01351317 |
Typical example |
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Turbocharger - Remove
2007/04/09 An Improved Expansion Tank is Available {1379}
G3516 Petroleum Engines Accessory Drive (Front) - Remove
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Normal Operation
3500 Generator Sets Engine Rating Definitions
3508C, 3512C and 3516C Marine Engines Electric Starting Motor - Remove and Install
C15 On-Highway Engine Engine Oil Pan
C18 Marine Auxiliary Engines Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines Piston and Rings
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0247 - FMI 09
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Vibration Damper - Remove and Install
The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103} The Filter Bypass Light for the Transmission Filter May Activate Prematurely{3103}
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Remove
C18 Power Module Cooling System Coolant (ELC) - Change
G3516B and G3520B Generator Set Engines Rocker Shaft and Push Rod - Install
G3516B and G3520B Generator Set Engines Cylinder Head - Disassemble
G3516B and G3520B Generator Set Engines Cylinder Head - Remove
G3516B and G3520B Generator Set Engines Cylinder Head - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Cylinder Head - Install
G3516B and G3520B Generator Set Engines Piston and Connecting Rods - Remove
Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803} Procedure for Properly Timing the Air Compressor and the Fuel Injection Pump on C7 Engines{1251, 1803}
Procedure to Torque the Camshaft Gear{1210, 1212} Procedure to Torque the Camshaft Gear{1210, 1212}
C7 and C9 On-highway Engines ARD Nozzle - Clean