A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
- Industrial Engine:
- 3406E (S/N: 6BR1-UP; 9WR1-UP; 8AZ1-UP)
- Marine Engine:
- C32 MARINE (S/N: RNC1-UP)
- 3456 (S/N: 3LW1-UP)
- C-15 (S/N: BEM1-UP)
- C-16 (S/N: BFM1-UP)
- C18 (S/N: CKH1-UP; WJH1-UP; C1J1-UP)
There have been some instances of the valve bridge that is contacting the rotocoil. The valve bridge should rest on the valve stem. Before attaching the rocker arm assembly to the head, check the gap between the valve bridge and the rotocoil. Ensure that you seat the valve bridge. Apply pressure with your finger on the valve bridge in order to seat the valve bridge. The minimum gap between the rotocoil and the valve bridge should be 0.508 mm (0.020 inch). When the valve bridges are installed on the heads, measure the gap between the rotocoils and the valve bridges. If the minimum gap is not met, a new valve bridge needs to be installed. Also, contact your local engine technical communicator in order to report the issue.
Caterpillar Information System:
CX31 On-Highway Transmission Retarder Troubleshooting
3176C and 3196 Marine Engines Declaration of Conformity
C11 and C13 Petroleum Engines Alternator and Regulator
2006/04/10 New Oil Pan Groups Have Been Released {1302}
C7 PETROLEUM Petroleum Engine Fuel Filter Base - Remove and Install
G3508, G3512 and G3516 Engines Drive Housing (Front) - Remove and Install
C7 PETROLEUM Petroleum Engine Fuel Priming Pump - Remove and Install
G3500 A3 Engines Actuator Linkage - Air/Fuel Ratio Valve
C3.3 and C4.4 Generator Sets Generator - Install
C3.3 and C4.4 Generator Sets Generator - Remove
C4.4 Industrial Engine Crankshaft - Steel Crankshaft
2006/03/20 Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0781, 1900}
3176C and 3196 Marine Engines Safety Messages
C7 On-highway Engine Engine Oil Pan
C9 Industrial Engines Alternator and Regulator
2006/03/01 A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
C7 On-highway Engine Engine Oil Pan
C-15, C-16, and C-18 Truck Engines Alternator and Regulator
3116 and 3126 Marine Engines Declaration of Conformity
3126B Marine Engine Safety Messages
C15 On-Highway Engine Coolant Temperature Sensor - Remove and Install
C15 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
C15 On-Highway Engine Belt Tensioner - Remove and Install
2006/04/03 A New Grease is Used {0645}