C-15, C-16, and C-18 Truck Engines Caterpillar


Alternator and Regulator

Usage:

C-15 6NZ


图 1g02560034

表 1
技术规格,用于 121-4134 充电交流发电机总成 
项目  数量  零件  技术规格说明 
使用碳堆式 4C-4911 蓄电池负载测试仪加载测试蓄电池,获取最大交流发电机输出 
2K-4821 锁紧螺母  拧紧至扭矩为 102 ± 7 N·m (75 ± 5 lb ft)。 
6V-8189 螺母  (B+) 接线端。 拧紧至扭矩为 11.3 ± 2.3 N·m (100.0 ± 20.0 lb in)。 
3E-5451 电压调节器组件  电压设置不可调节。 
4M-5281 螺栓  (B-) 接线端。 拧紧至扭矩为 6.2 ± 0.6 N·m (55.0 ± 5.0 lb in)。 
电压为 12 V。 
电流为 115 安培。 
极性为负极接地。 
可朝顺时针或逆时针方向转动。 
最大起动转速为 2300 rpm。 
25 °C (77 °F) 时的交流发电机性能 
5000 rpm 时的最小满载电流为 107 安培。 
1500 rpm 时的最小满载电流为 45 安培。 
输出电压为 14.0 ± 0.5 V。 

Caterpillar Information System:

C7 On-highway Engine Engine Oil Pan
2006/03/01 A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
C9 Industrial Engines Alternator and Regulator
C7 On-highway Engine Engine Oil Pan
3176C and 3196 Marine Engines Safety Messages
2006/03/20 A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
CX31 On-Highway Transmission Retarder Troubleshooting
3176C and 3196 Marine Engines Declaration of Conformity
C11 and C13 Petroleum Engines Alternator and Regulator
2006/04/10 New Oil Pan Groups Have Been Released {1302}
C7 PETROLEUM Petroleum Engine Fuel Filter Base - Remove and Install
G3508, G3512 and G3516 Engines Drive Housing (Front) - Remove and Install
3116 and 3126 Marine Engines Declaration of Conformity
3126B Marine Engine Safety Messages
C15 On-Highway Engine Coolant Temperature Sensor - Remove and Install
C15 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
C15 On-Highway Engine Belt Tensioner - Remove and Install
2006/04/03 A New Grease is Used {0645}
Turbocharger Surge on G3500 Generator Sets and G3500 Generator Set Engines that are Equipped with Dual Turbochargers{1052, 1057, 1071} Turbocharger Surge on G3500 Generator Sets and G3500 Generator Set Engines that are Equipped with Dual Turbochargers{1052, 1057, 1071}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0177 - FMI 00
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0177 - FMI 01
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0668 - FMI 09
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 0702 - FMI 02
C15 On-Highway Engine Vibration Damper and Pulley - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.