Fuel Priming Pump - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (2) 和垫圈。
Show/hide table
 | |
| 图 1 | g01255181 |
- 从燃油滤清器座 (1) 上拆下充油泵 (3) 和密封垫。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将垫片和充油泵 (3) 定位到燃油滤清器座 (1) 上。
Show/hide table
| | |
| 图 2 | g01255181 |
- 安装螺栓 (2) 和垫圈。
- 把空气从燃油系统中排除出去。
Caterpillar Information System:
G3500 A3 Engines Actuator Linkage - Air/Fuel Ratio Valve
C3.3 and C4.4 Generator Sets Generator - Install
C3.3 and C4.4 Generator Sets Generator - Remove
C4.4 Industrial Engine Crankshaft - Steel Crankshaft
2006/03/20 Schedule to Discontinue Technical Product and Warranty Support on Selected Pocket Tec Parts {0781, 1900}
C15 Industrial Engine Timer Parameters
C15 Industrial Engine Input Selections
C4.4 Industrial Engine Crankshaft Pulley
C15 Industrial Engine Cruise Control Parameters
2006/04/10 Product Structure Residence Changes for Parts Information {7000, 7300}
G3500 Engines Performance Parameters
C7 On-highway Engine Air Inlet Elbow
G3508, G3512 and G3516 Engines Drive Housing (Front) - Remove and Install
C7 PETROLEUM Petroleum Engine Fuel Filter Base - Remove and Install
2006/04/10 New Oil Pan Groups Have Been Released {1302}
C11 and C13 Petroleum Engines Alternator and Regulator
3176C and 3196 Marine Engines Declaration of Conformity
CX31 On-Highway Transmission Retarder Troubleshooting
2006/03/20 A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
3176C and 3196 Marine Engines Safety Messages
C7 On-highway Engine Engine Oil Pan
C9 Industrial Engines Alternator and Regulator
2006/03/01 A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
C7 On-highway Engine Engine Oil Pan