Accessory Drive (Upper Left Hand)
Show/hide table
图 1 | g01109747 |
(1) 轴承孔
- 装配后轴承孔孔径 ... 44.475 ± 0.025 mm (1.7510 ± 0.0010 in)
- 新齿轮直径 ... 44.400 ± 0.015 mm (1.7480 ± 0.0006 in)
(2) 轴承孔
- 装配后轴承孔孔径 ... 75.000 ± 0.055 mm (2.9528 ± 0.0022 in)
- 新齿轮直径 ... 74.900 ± 0.015 mm (2.9488 ± 0.0006 in)
Caterpillar Information System:
SCJ and 8SC Series Alternators Stator - Test
SCJ and 8SC Series Alternators Field Winding - Test
SCJ and 8SC Series Alternators Capacitor - Test
G3520C and G3520E Engines Temperature Sensor - Thermocouple
3126B Petroleum Engine Throttle Position Sensor Circuit - Test
C-10 and C-15 Petroleum Engines Injector Solenoid Circuit - Test
G3408C and G3412C Engines Engine Oil Level - Check
2004/04/01 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
G3408C and G3412C Engines Starting with Jump Start Cables
G3408C and G3412C Engines Before Starting Engine
G3408 and G3412 Engines Engine Operation
C-10 and C-15 Petroleum Engines Ether Injection System - Test
3126B Petroleum Engine Diagnostic Flash Code Retrieval
C-15 Petroleum Engine Auxiliary Water Pump - Disassemble
C-15 Petroleum Engine Auxiliary Water Pump - Assemble
3126B Petroleum Engine Refill Capacities and Recommendations
C7 On-highway Engine Air Compressor
G3520C and G3520E Engines Water Pump
3126B Petroleum Engine Engine Oil and Filter - Change
C-15 Petroleum Engine Aftercooler - Install
C-15 Petroleum Engine Aftercooler - Remove
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C-15 Petroleum Engine Fuel Filter Base - Remove