Fuel Transfer Pump - Remove - If Equipped
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将燃油进口管路和燃油出口管路从燃油输送泵 (4) 上拆下。 立即在燃油进口 (1) 和燃油出口 (2) 上安装保护盖或在燃油进口 (1) 和燃油出口 (2) 上安装螺塞来防止污染。
Show/hide table
 | |
| 图 1 | g00644483 |
- 将两条螺栓 (3) 和燃油输送泵 (4) 从单体喷油器液压泵上拆下。
- 将 O 形密封圈从单体喷油器液压泵上拆下。 检查 O 形密封圈有无磨损或损坏。 如果 O 形密封圈磨损或损坏，则应使用新零件更换。
Caterpillar Information System:
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3412C Engine Pistons and Connecting Rods - Disassemble
SPS342 Skid Mounted Pumper Plate Locations and Film Locations
3412C Engine Crankshaft - Install
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
Product Identification Numbers (PIN) Location Guide General Information
G3408C and G3412C Engines Air Cleaner Housing - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Cylinder Liner - Install
3054 and 3056 Industrial and Generator Set Engines Overhaul Considerations
349F and 352F Excavators Machine System Specifications Oil Filter (Return)
G3408C and G3412C Engines Piston Cooling Jets - Remove and Install
3412E, C30 and C32 Marine Engines Camshaft - Remove
3412E, C30 and C32 Marine Engines Camshaft - Install
3500B Engines Turbocharger
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
3412C Engine Pistons and Connecting Rods - Assemble
G3500 Generator Sets Refill Capacities
G3408C and G3412C Engines Turbocharger - Disassemble
SPS342 Skid Mounted Pumper Model View Illustrations
Product Identification Numbers (PIN) Location Guide Excavator (Track)
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
3412C Engine Connecting Rod