Camshaft - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Group | 1 |
Start By:
- Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
- Remove the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
- Remove the flywheel housing. Refer to Disassembly and Assembly, " Flywheel Housing - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) and plate (2) from the rear of the camshaft. Remove gear (3) from the camshaft.
Show/hide table
Illustration 2 g00572090 - Rotate the engine until Marks “V” on the front of the timing gears are in alignment.
Show/hide table
Illustration 3 g00572095 - Remove bolts (5) and plate (4) from the camshaft.
Show/hide table
Illustration 4 g00572105 - Remove camshaft (6) from the cylinder block.
Show/hide table
Illustration 5 g00572214 - Use Tooling (A) and a suitable press to remove camshaft gear (7).
Show/hide table
Illustration 1 | g00572086 |
Caterpillar Information System:
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3412C Engine Pistons and Connecting Rods - Disassemble
SPS342 Skid Mounted Pumper Plate Locations and Film Locations
3412C Engine Crankshaft - Install
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
Product Identification Numbers (PIN) Location Guide General Information
G3408C and G3412C Engines Air Cleaner Housing - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Cylinder Liner - Install
3054 and 3056 Industrial and Generator Set Engines Overhaul Considerations
349F and 352F Excavators Machine System Specifications Oil Filter (Return)
3412E, C30 and C32 Marine Engines Camshaft - Install
3500B Engines Turbocharger
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
3412C Engine Pistons and Connecting Rods - Assemble
G3500 Generator Sets Refill Capacities
G3408C and G3412C Engines Turbocharger - Disassemble
SPS342 Skid Mounted Pumper Model View Illustrations
Product Identification Numbers (PIN) Location Guide Excavator (Track)
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
3412C Engine Connecting Rod
2001/04/16 Correction to Operation and Maintenance Manual, SEBU7275-01, "Maintenance Interval Schedule" {7500}