Air Cleaner Housing - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove cover (2) from air cleaner housing assembly (1) .
Show/hide table
Illustration 1 | g00786359 |
- Remove air cleaner element from air cleaner assembly (1) .
- Disconnect line (3) at air cleaner housing assembly (1) .
- Remove ten locknuts (inside the air cleaner housing assembly), that hold the air cleaner housing assembly to air cleaner adapter (4) .
Show/hide table
Illustration 2 | g00786364 |
- Remove three bolts (5) and remove air cleaner housing assembly (1) .
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install air cleaner housing assembly (1) and install three bolts (5) .
Show/hide table
Illustration 3 | g00786364 |
- Install ten locknuts (inside the air cleaner housing assembly), that hold the air cleaner housing assembly to air cleaner adapter (4) .
- Connect line (3) at air cleaner housing (1) .
Show/hide table
Illustration 4 | g00786359 |
- Install air cleaner element to air cleaner assembly (1) .
- Install cover (2) to air cleaner housing assembly (1) .
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Cylinder Liner - Install
3054 and 3056 Industrial and Generator Set Engines Overhaul Considerations
349F and 352F Excavators Machine System Specifications Oil Filter (Return)
G3408C and G3412C Engines Piston Cooling Jets - Remove and Install
G3500 Generator Sets Plate Locations and Film Locations
3126B Engines Air Inlet and Exhaust System
3500B High Displacement Air Inlet and Exhaust Lines
G3408C and G3412C Engines Cylinder Head - Install
Product Identification Numbers (PIN) Location Guide Asphalt Screed
3412C Engine Engine Oil Lines
G3408C and G3412C Engines Cylinder Head - Remove
3412C Engine Engine Oil Cooler
Product Identification Numbers (PIN) Location Guide General Information
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
3412C Engine Crankshaft - Install
SPS342 Skid Mounted Pumper Plate Locations and Film Locations
3412C Engine Pistons and Connecting Rods - Disassemble
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
3412E, C30 and C32 Marine Engines Camshaft - Remove
3412E, C30 and C32 Marine Engines Camshaft - Install
3500B Engines Turbocharger
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped