Piston Cooling Jets - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 5P-7307 | 发动机盘车工具 | 1 |
开始:
- 拆卸机油泵。 请参阅拆解和组装, "油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1 ) 。
Show/hide table
 | |
| 图 1 | g00508149 |
- 从发动机上拆下活塞冷却喷嘴 (2) 。
- 用工具 (A) 顺时针旋转曲轴来检修活塞冷却喷嘴。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| | |
| 图 2 | g00508149 |
- 将活塞冷却喷嘴 (2) 安装到发动机上。
- 安装螺栓 (1) 。
- 用工具 (A) 顺时针转动曲轴来检修活塞冷却喷嘴的安装。
End By: 安装机油泵。 请参阅 拆解和组装, "油泵 - 安装"。
Caterpillar Information System:
G3500 Generator Sets Plate Locations and Film Locations
3126B Engines Air Inlet and Exhaust System
3500B High Displacement Air Inlet and Exhaust Lines
G3408C and G3412C Engines Cylinder Head - Install
Product Identification Numbers (PIN) Location Guide Asphalt Screed
3412C Engine Engine Oil Lines
G3408C and G3412C Engines Cylinder Head - Remove
3412C Engine Engine Oil Cooler
3412C Engine Engine Support (Front)
G3408C and G3412C Engines Rocker Shaft and Push Rod - Install
G3500 Generator Sets Product Description
3412C Engine Automatic Timing Advance Unit
349F and 352F Excavators Machine System Specifications Oil Filter (Return)
3054 and 3056 Industrial and Generator Set Engines Overhaul Considerations
C9 Marine Engines and C9 Marine Generator Sets Cylinder Liner - Install
G3408C and G3412C Engines Air Cleaner Housing - Remove and Install
Product Identification Numbers (PIN) Location Guide General Information
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
3412C Engine Crankshaft - Install
SPS342 Skid Mounted Pumper Plate Locations and Film Locations
3412C Engine Pistons and Connecting Rods - Disassemble
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped